Finding your suitable readers for zwave freezer alarm is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for zwave freezer alarm including detail information and customer reviews. Let’s find out which is your favorite one.
848 reviews analysed
![Power Failure Alarm [PFA-1]](https://images-na.ssl-images-amazon.com/images/I/71A19uG%2B3pL._SL300_.jpg)
1. Ecolink Zwave Plus Flood & Freeze Sensor, White (FLF-ZWAVE5-ECO)
Feature
- ADVANCED TECHNOLOGY AND PRECISION: Easily to install sensor with 36in probe to quickly detect leak under sinks, behind refrigerators etc. before they turn into expensive repairs.
- FREEZE SENSOR: It triggers at 41◦F (5◦C) to notify you before a pipe freeze condition occurs or use it to tell your Z-wave thermostat to turn on/up the heat.
- BATTERY LIFE: Five year battery life on one CR123A lithium battery.
- Z-WAVE: Natively compatible with SmartThings, it works with most brands of Z-wave home security hubs like Vera Plus, Vera Edge, Vera Lite, HomeSeer, D-link staples connect and Piper NV. If your brand is not listed, (e.g. Wink or Alarm.com based security panels) compatibility cannot be guaranteed.
- ECOLINK: Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices.
Description
With its advanced technology and precision, the Ecolink Flood and Freeze Sensor will alert you of flood, and damaging low temperatures. Its compact design makes it ideal for placement under sinks, next to toilets or other high risk areas that need protection.
2. Haozee Zwave Plus Water Leak Sensor,Smart Flood Detector with Remote Probe Water Resistant¡
Feature
- Z Wave Plus Water Detector:As soon as water detected, an acoustic and visual alarm will sound,Also integrates with other zwave sensors to sound an alarm,or shut-off your water.
- Unique Design:Detecting the water can be done in 2 ways: by the golden dots on the bottom of the sensor,or to use the probe which is about 1 meter to detect water.make it easier to monitor water activity in hard to-Reach places like sump pumps,toilets
- Instant Notifications:Be notified immediately through your smart phone or laptop when water detected.prevent it before it is too late.Compared with wifi,zwave are more stable.reliable to get water leak alarm when water detected.
- Battery powered: CR2 battery can last up to one years. The water sensor sends you a notification when it’s time for a change
- Z-wave Plus technology for water leak:Need zwave hub to operate.Z-Wave Plus Certified And works with Smartthings,Wink.We confirm that our sensors works with Smarttings or Wink.But can’t sure with other zwave hub.it can pair with zwave certified hub.but it may detect as door sensor for some hubs.
3. Failed Circuit Alarm (New Style)
Feature
- FCA12-11 Failed Circuit Alarm, 110 / 120 volt Power failure detection with power present light and auto reset
- A item to alert you when a circuit has tripped out freezers, heaters, pumps, mid-night power outages, etc
- 85 to 90 Decibel Buzzer
- Velcro Mount up to 9 foot from outlet
- 9-Volt battery operates alarm (battery NOT Included)
Description
FCA12-11 Failed Circuit Alarm, 110 / 120 volt Power failure detection with power present light and auto reset Features: 9 ft cord Test button Toggle on/off switch 85 to 90 Decibel Buzzer Velcro Mount up to 9 foot from outlet Fits and monitors the standard 110 / 120V outlet Easy installation and a 1 year limited warranty Alarms approx 36 + hours on new quality battery 9-Volt battery operates alarm (battery NOT Included) 115v plug with a low voltage 9 Volt transformer powers unit Green power present light to give visual indication of power presence A item to alert you when a circuit has tripped out freezers, heaters, pumps, mid-night power outages, etc Usage ideas, testing for live outlets prior to working on by green light power present light, tracing breakers by plugging into an outlet at a distance while tracing breakers by sound alert when associated breaker is opened.
4. Aeotec Water Sensor 6 Z-Wave Plus Enabled Home Security Zwave Water Sensor Water Leak Detector Smart Flood Sensor Freeze Sensor Temperature Detector (Water Sensor 6)
5. Automatic Power Cut Failure Alerter LED Indicator Smart 120db Outage Alarm Warning Siren, Needs 9V Battery (Not Included)
Feature
- LED indicator shows power out / failure alarm and power condition.
- Connect the alarm to the AC power supply and turn on the power switch to enter the working state. The siren alarms when the power supply is cut off until restore power. The warning could be manual muted by on/off switch.
- High voltage resistant design, works fine even when power voltage exceeds standard.
- Drawer-type cell cover design, can change the battery easily.
- Widely used in industrial and mining enterprises, institutions, substations, telecommunications rooms, farms, etc.
Description
Features:
LED indicator shows power out / failure alarm and power condition. The siren alarms when the power supply is cut off until restore power. The warning could be manual muted by on/off switch. Drawer-type cell cover design, can change the battery easily. High voltage resistant design, works fine even when power voltage exceeds standard.
Specification:
Plug: CN Plug
Voltage: AC 220V
Color: Color
Battery: 1pcs x 9V Battery (NOT included)
Alarm Volume: 120db
Cable Length: Approx. 85cm/33.5inch
Size: Approx. 10*5.3*2.5cm/3.9*2.1*1inch
Weight: Approx. 100g / 3.5oz
Package List:
1 x Power Failure Alarm
Note: Please kindly make a note if you need any plug adapter.
6. Power Failure Alarm [PFA-1]
![Power Failure Alarm [PFA-1]](https://images-na.ssl-images-amazon.com/images/I/71A19uG%2B3pL._SL1498_.jpg)
Description
Power fail alarm continuously monitors 120V AC power outlets and if there is an interruption, the LED flashes and a 102dB beeping alarm sounds to let you know. The alarm can be silenced by pushing the green button. A selectable "snooze alarm" feature will cause the alarm to come back every 30 minutes until power is restored. Will alarm for 72 hours straight with the supplied Lithium battery. The only power failure device with plug detection; if your plug becomes unplugged from the power fail alarm itself, this is detected electrically and the alarm sounds. Simple installation, just pop in the (included) long-life lithium battery. After that you are protected for the next 10 years. Very loud beeping audio buzzer – 103dB at 2 ft will never be missed even in noisy factories. Extremely low power consumption allows the lithium battery to last up to 10 years. After that time, if battery power is low due to excessive alarming time, a low-battery warning alarm sounds for many weeks. Selectable modes so it can detect millisecond blips, (useful for computer equipment) or only report power outages longer than 10 seconds. Convenient passthrough receptacle. Includes a secure screw-mounting tab for critical process monitoring equipment, freezers, heaters, pumps, fans and more.
7. Aeotec Water Sensor, Z-Wave Flood & Leak Sensor
Feature
- Monitor and protect against leaks and floods in real-time. Can also detect the absence of water when used with tanks
- Super accurate
- can detect as little as 0.03% of an inch of water
- AAA battery-powered and wireless with 1 year battery life
- Compatible with certified Z-Wave gateways including Samsung SmartThings, mirrors vera, open Z-Wave, in control, and homeseer
- Z-wave certified. Certification Number: zc08-14030008
Description
We all protect our homes against fires and thefts, but, each year, more homes are damaged by small water leaks than larger disasters. Aeotec’s Z-Wave Water Sensor helps you monitor for water leaks and floods and prevent them. Super accurate, it’s capable of measuring as little as 0.03% of an inch of water. Powered by 2 x AAA batteries and with a typical battery life of over 1 year, Water Sensor is compatible with certified Z-Wave gateways including Fibaro, HomeSeer, openHab, Samsung SmartThings, Vera, and Wink.
8. La Crosse Alerts Mobile 926-25101-GP Wireless Monitor System Set with Dry Probe
Feature
- Remotely monitors sensors 24/7 using a APP. Perfect for…Backyard temperature and humidity
- Plants, gardens and greenhouses
- Refrigerators, freezers
- Food storage
- Sensitive electronics
- Outdoor pets and livestock
- and so much more
- Temperature and humidity measures: (1) Ambient air temperature
- (2) Ambient humidity
- (3) Probe temperature, Temperature range: -40°F to 140°F
- Includes: sensor, internet gateway with LAN cable & AC adapter, DRY probe
- Requires 2 AAA Alkaline batteries (not included)
- Text and E-mail Alerts first 3 months FREE
- 1 year subscription available after for $11.88 yearly ($0.99 per month), kindly refer the user manual given below for troubleshooting steps.
Description
For proper set up follow the below steps 1. Connect gateway to router. 2. Insert power cord into outlet and into the gateway. 3. Wait for 4 red blinks 4. Optional: Insert Probe into sensor. 5. Insert 2 AAA batteries into sensor. (Dated 2025 or newer) Observe correct polarity. 6. Download La Crosse Alerts Mobile App.
9. Samsung GP-U999SJVLCAA Smart Things Water Leak Sensor – Automate Lights & Siren For Alert – ZigBee | Accessory to Smart Things Hub White
Feature
- Availability Zone: Smart things Water Leak Sensor is ONLY available in the U.S.
- Immediate alerts: get instant phone alerts at the first sign of excess water or moisture to prevent leaks and flooding
- Notification options: light or siren alerts turn on If water is detected where it doesn’t belong and monitors temperature too (requires 32 to 104°f operating temperature)
- Accident prevention: program your connected smart devices to shut down Electronics when abnormal moisture or temperature is detected
- Requirements: must have SmartThings app and SmartThings hub or compatible device with SmartThings hub functionality (connected devices sold separately)
Description
REQUIRES: Smart Things Hub or compatible device with SmartThings Hub functionality and SmartThings app.
The SmartThings water leak sensor monitors moisture and water leaks to prevent flooding or other unexpected disasters. This sensor can also monitor temperature and give alerts through thermostats to give updates on the status of your smart home. Sudden rises or Falls in temperature can be recorded and viewed from the Samsung SmartThings water leak sensor on the SmartThings free mobile app.
Free SmartThings app requires Android (6.0 or later) or iOS (10.0 or later). this device is compatible with the SmartThings ADT security hub, but is not compatible with ADT professional monitoring services. Included: battery, quick-start guide, and health and safety guide. 1 year Samsung SmartThings limited warranty. Technical details: power: 1 x CR2 battery range: 50-130 feet depending on your home’s construction operating temperature: 32 to 104°f intended for indoor use only
Only available for use in the U.S.
10. SensorPush Wireless Thermometer/Hygrometer for iPhone/Android – Humidity & Temperature Smart Sensor with Alerts. Developed and Supported in The USA
Feature
- Flexible: Add a SensorPush G1 WiFi Gateway (sold separately) for data and alerts via the Internet
- Powerful range: For use all around the house. Up to 325′ in ideal conditions (no obstructions)
- Designed with you in mind: Beautifully designed apps for Apple iOS and Android make monitoring easy
- Accurate: Swiss-made sensing component provides reliable, accurate measurements
- Set it and forget it: Pushes readings to devices via Bluetooth 4.0 and alerts you if there’s a problem
Conclusion
By our suggestions above, we hope that you can found Zwave Freezer Alarm for you.Please don’t forget to share your experience by comment in this post. Thank you!
