Plug-in module allows control of appliances/lamps from anywhere in the house using any X10 controllerWorks with fans air conditioners coffee pots stereos TVs and lampsCompatible 15A 1/3 HP and 500-watt appliances

Appliance Module For Home Security and Comfort. Works with X10 Powerhouse Controllers and Timers. Just plug it in…. No special wiring!

You’ll be the envy of all your friends and neighbors when they see how you can control lamps, stereos, fans, porch lights, electric fountains and more – without leaving your seat! Want to control devices from more than one remote? Expanding is incredibly easy! Add as many handheld remotes as you want. As long as they’re set to the same house code as the base, they will control the same devices.

You can enable X10 remote control inside a wired fixture with the X10 PRO Wired-In Inductive Fixture Module. Designed to control incandescent lighting fixtures or inductive loads, the module is compact enough to fit inside a single-gang box, a recessed lighting can, etc. This XPFM module is similar to the XPDF in-line fixture module, except this one supports inductive loads and does not support dimming. NOTE: The module can only be used in fixtures where 60-degree C wiring is permitted. SPECS: Power Requirements: 120 VAC, 60 Hz. Power Rating: 1800W, 15 Amps max. X10 Control: On/Off, All On/Off Capable. Dimmable: No. Max. Operating Temperature: 140 degrees F (60 degrees C). Dimensions: 2.94(L) x 2.06(W) x 1.3(D) inches.

The powerful TM751 Transceiver Module is the backbone for any Home Automation setup. It allows you to remotely control any household appliance or light that is plugged into an appliance, lamp module, wall switch module or any of our many other lighting and appliances products. Simply plug the Transceiver into any normal wall socket, and using a remote, you have control of your lamps and appliances from across the room – or the other side of the house. The wireless transceiver module is an integral part of your home control system. It takes radio frequency commands from X10 remote controls and wireless motion sensors and converts them to X10 signals carried over household wiring.

The LM465 is the most basic of lamp modules. It is ultra easy to set up, portable and concealable. It is our most popular lamp module solution. Simply take the LM465, plug it into your wall socket, set the dial code and then control it with any X10 controller. It really is that easy! The LM465 enables you to control your lamps with the press of a button. They are even dimmable. Set the mood and dim those lights to the appropriate level, all without getting up. Use it in conjunction with other X10 modules and you can create whole scenes that turn on and off a whole room or even the whole house. X10 is simple, yet robust and the possibilities are endless. These are usually used to control incandescent lights, but can also control some dimmable alternative lighting (led, fluorescent, etc). If you have alternative lighting that cannot be dimmed, grab an AM466 Appliance Module instead! It looks and operates virtually the same, except it has a relay that cuts power on and off. It doesn’t conflict with some of the newer, alternative lighting options like the LM465 can.

Control up to 8 different groups of X10 compatible receivers (lamp and appliance modules wall switches and universal modules)Dim/bright control and an all-lights-on/all-lights-off buttonCompact design

X10 started manufacturing home automation and security products in the late 70s and has been one of the smart home standards since its inception. X10 utilized powerline language to transmit control signals anywhere in your house over your existing 110V electrical lines so you can control lights and appliances throughout your home without running new wires Simply add a controller transmitter at one electrical outlet and add another module receiver at any other outlet and you have remote control of that module. Choose from plug-in wired-in and wireless models. This enables you to have the remote and automated control of lights and appliances from anywhere on your property. The convenience and security of controlling all your lights and appliances from anywhere in your house is simple and inexpensive.Features. Rated up to 20A 220VAC loads. Plug In device. Color White

Plug-in module allows control of appliances/lamps from anywhere in the house using any X10 controllerWorks with fans air conditioners coffee pots stereos TVs and lampsCompatible 15A 1/3 HP and 500-watt appliances

Appliance Module For Home Security and Comfort. Works with X10 Powerhouse Controllers and Timers. Just plug it in…. No special wiring!

The powerful TM751 Transceiver Module is the backbone for any Home Automation setup. It allows you to remotely control any household appliance or light that is plugged into an appliance, lamp module, wall switch module or any of our many other lighting and appliances products. Simply plug the Transceiver into any normal wall socket, and using a remote, you have control of your lamps and appliances from across the room – or the other side of the house. The wireless transceiver module is an integral part of your home control system. It takes radio frequency commands from X10 remote controls and wireless motion sensors and converts them to X10 signals carried over household wiring.

You’ll be the envy of all your friends and neighbors when they see how you can control lamps, stereos, fans, porch lights, electric fountains and more – without leaving your seat! Want to control devices from more than one remote? Expanding is incredibly easy! Add as many handheld remotes as you want. As long as they’re set to the same house code as the base, they will control the same devices.

You can enable X10 remote control inside a wired fixture with the X10 PRO Wired-In Inductive Fixture Module. Designed to control incandescent lighting fixtures or inductive loads, the module is compact enough to fit inside a single-gang box, a recessed lighting can, etc. This XPFM module is similar to the XPDF in-line fixture module, except this one supports inductive loads and does not support dimming. NOTE: The module can only be used in fixtures where 60-degree C wiring is permitted. SPECS: Power Requirements: 120 VAC, 60 Hz. Power Rating: 1800W, 15 Amps max. X10 Control: On/Off, All On/Off Capable. Dimmable: No. Max. Operating Temperature: 140 degrees F (60 degrees C). Dimensions: 2.94(L) x 2.06(W) x 1.3(D) inches.

The LM465 is the most basic of lamp modules. It is ultra easy to set up, portable and concealable. It is our most popular lamp module solution. Simply take the LM465, plug it into your wall socket, set the dial code and then control it with any X10 controller. It really is that easy! The LM465 enables you to control your lamps with the press of a button. They are even dimmable. Set the mood and dim those lights to the appropriate level, all without getting up. Use it in conjunction with other X10 modules and you can create whole scenes that turn on and off a whole room or even the whole house. X10 is simple, yet robust and the possibilities are endless. These are usually used to control incandescent lights, but can also control some dimmable alternative lighting (led, fluorescent, etc). If you have alternative lighting that cannot be dimmed, grab an AM466 Appliance Module instead! It looks and operates virtually the same, except it has a relay that cuts power on and off. It doesn’t conflict with some of the newer, alternative lighting options like the LM465 can.

Control up to 8 different groups of X10 compatible receivers (lamp and appliance modules wall switches and universal modules)Dim/bright control and an all-lights-on/all-lights-off buttonCompact design