What if you could turn on your fan from across the room? Simply Automated’s UPB Appliance Module makes it possible it to control an appliance such as a coffeepot, fan or even fluorescent lighting using your existing outlets. Just plug the appliance into t

The PulseWorx UPB Plug-In Appliance Module (12A) is a high quality plug-in home automation relay load controller that is capable of transmitting and receiving digital commands and status over the existing powerlines. It’s perfect for remotely controlling one or more 120VAC non-dimming appliances up to 12 Amps. Simply plug the AM1 into any standard wall outlet and then plug the appliance into the AM1’s bottom controlled outlet. A pass-through outlet allows plugging in vacuums, computers, and other devices that do not require remote control. The AM1 will accept powerline commands from any UPB-compatible transmitter such as the PulseWorx Keypad Controllers, Timed Event Controller, Interface Modules, Approved Third-Party Controllers, Touch Screens, and WS1s. It can be a member of up to 16 Links/scenes with the capability to store a pre-set relay state of 0% or 100%. Each pre-set state can easily be adjusted by the homeowner using the innovative PulseWorx manual programming method. Each Appliance module can be configured to transmit status changes and inform the rest of the network when the Timed auto-off function has automatically turned the appliance off. This allows the AM1 to remotely control other devices or update indicators (LEDs on our keypads). Like all PulseWorx devices, the AM1 can be initially configured using PCS’s free UPStart Setup Software tool. UPStart enables configuring such parameters as Network Name, Network ID, Unit ID, Room name, Device name, default on light levels, fade rates, LED colors, dimming disable, auto shut-off time, etc. as well as test the operation and communication strength of the device. UPStart has the option to configure an entire network off-line and then download the information into the devices after they are installed in the home.

The HAI by Leviton UPB Appliance Module is a plug-in that incorporates UPB (universal powerline bus) two-way powerline communication technology, which gives it the ability to be remotely controlled by UPB compatible controllers. The Appliance Module has one UPB-controllable outlet that can sense the appliance’s local on/off switch to turn the appliance on, even after it was turned off using UPB control. The HAI by Leviton UPB Appliance Module is also capable of transmitting UPB messages when the local load switch is used to turn the load on or off. The UPB Appliance Module controls loads up to 15 amps, general purpose, 1/2-horsepower. The HAI by Leviton UPB Appliance Module is simply plugged into a standard wall outlet. The HAI by Leviton UPB Appliance Module comes equipped with a multi-color LED indicator that is normally lit to blue when the load is off. The LED will turn off when the load is turned on.

Product description

Simply Automated’s UPB Controller Scheduler-Timer (model UCS) allows you to control all UPB devices and scenes based on events or a set schedule. It is simple to operate and flexible, and is often used in place of more complex whole home automation schedulers because it is easier for most homeowners to program and adjust. Once the Scheduler-Timer has been setup, you can rely on timely lighting without worry. The Scheduler Timer automatically adjusts according to the nationally synchronized power grid, so it knows when daylight savings and leap years occur and even when the sun rises and sets for your location. Easy-to-navigate menus allow configuration without the use of a computer or UPStart software. However, the UCS can also serve as a computer interface module (CIM), allowing a PC with UPStart to connect to a UPB network. Tools Menu: Works like a pocket programmer. Add devices to a network. Change receive links. Monitor signal/noise levels logs noise, and more. Up to 99 events can be configured after initial setup, which includes setting the time, location (using zip code or latitude/longitude) and Network ID#. Each of the 99 available events can control a device or a scene based on time, sunrise (dawn), sunset (dusk) or a combination of a time from sunrise or sunset. The UCS communicates with a UPB automation network when plugged into a standard power receptacle (an L-shaped power connector or the 6-foot power cord are included). In the event of a power loss, the programs are stored in non-volatile memory and will not be lost; and time will be maintained with power off for approximately one week.

From the Manufacturer

Scheduler-Timer. Automatic on/off scheduling for all Simply Automated dimmers, lamp/appliance/fixture modules and wall receptacle. Designed for ease of use. No computer programming required. Simple-n-easy lighting control for all Simply Automated dimmers, lamp/appliance/fixture modules and wall receptacle. Automatically turns on/off indoor or outdoor security lighting. Create night time convenience pathway lighting. Automatically turns on/off appliances, heaters, fans, pumps or motors — replaces large clunky mechanical light or pump timers. Energy savings dimming feature (from 10%, 20%, 30%, 40%, to 90% dimming levels). Random ‘vacation mode’ setting. Built-in celestial clock computes sunrise and sunset. Calculates daylight savings time. Simply Automated is an industry leader in home automation and lighting control. We provide an optimum solution for your home lighting automation needs — quick-n-easy installation, most complete product line in the industry, powerful UPB powerline technology and low price. Simply Automated products utilize Universal Powerline Bus (UPB) technology. Our products work over the pre-existing electrical wiring in your home. No new wires needed! And only Simply Automated provides patented easy-to-use SimplySmartTM firmware to make your installation process a 1-2-3 Done! Powerful custom expansion capability up to 250 devices using UPStart software and your PC — add additional single rocker dimmers, deluxe dimmers with different faceplates (up to 8 buttons), lamp or appliance modules, tabletop pedestal with 8 buttons, wall receptacle, fixture relay, fixture dimmer or scheduler-timer. Lighting control for your entire home. To ensure a proper installation in your home: – Your home should be no more than 2500 square feet and have only one breaker panel. A phase coupler is required in some home installations. – Not intended for use in multi-dwelling (condo, apartment, duplex) units.

PROFESSIONAL GRADEOne high quality professional grade 900W switch. Works in unison with the Simply Automated’s Anywhere 3-Way Switch Kit to create 4-way (3-switches, or more) lighting control. Replaces existing mechanical wall switches, utilize same wires of existingwall switches – no traveler wires or batteries needed. Turn on/offcircuits from two or more switches (neutral wire required).A simple cost effective alternative for the professional electrician -versus running costly new wiring or using wireless consumer DIYoptions that do not always work. Employs Simply Automated’sadvanced powerline technology – transmits over 1 mile.Wall plates sold separately.Simply Automated’s Anywhere Switches and Kits are incompatible (will not talk to or work) with any of Simply Automated’s PC-Configured, Pre-Configured, SimplySmartTM, or other UPB or UPStart product solutions.Color Change Kits (sold separately, see model ZS11)Easily change rocker color from gloss white to almond, ivory, light almond, black or brown. Simply remove the existing rocker and snap on the desired color.

The Anywhere Virtual Wire-In Relay Module (UFR-V0) is a heavy duty wire-in relay module that delivers up to 12 Amps of (120VAC) power. A high quality, professional grade fixture module for remote virtual lighting anywhere in your home. Use 1, 2, 3 or more Anywhere Virtual Wire-In Relay Modules to control multiple lights or appliances remotely in your home. Combine with 1, 2 or more Anywhere 3-Way Switch Kits or Anywhere Switches for virtual lighting and appliance control throughout your home. Turn on/off lighting, appliances, pumps, motors, fans, heaters, anywhere in your home – entry way, under cabinet, ceiling security lighting, pool pumps, space heaters, attic fans. Endless possibilities. Use in conjunction with Scheduler-Timer (UCS) to add even more flexibility to automatically control lighting and appliances. The choice of landscaping professionals to replace rotary timers in landscape lighting transformers. Up to four separate virtual control zones can be used in a home! Employs Simply Automated’s advanced powerline communication technology. No radio frequency (RF) emissions, used in tens of thousands of homes. The Anywhere Virtual Wire-In Relay Module is compatible with all Simply Automated’s Anywhere Virtual Lighting Control switches and accessories. Combine with one or more Anywhere 3-Way Switch Kit (V3WAY-A) or Anywhere Switch (US1-V0) for remote virtual lighting and appliance control throughout your home. Turn on/off lights, appliances, pumps, motors, fans, heaters, anywhere in your home – entry way, under cabinet, ceiling, security lighting / pool pumps / space heaters / attic fans. Endless possibilities. Additional expansion accessories items include Anywhere Virtual Controlled Receptacle Outlet (URD-V0) and Anywhere Virtual Plug-In Relay Module (UMA-V0). The Anywhere Series is not compatible with any of Simply Automated’s PC-Configured, Pre-Configured, SimplySmartTM, or other UPB or UPStart configured products.

HOLSEM Surge Protector 8 Outlets with 2 USB Ports 6 ft cord Power Strip

6 compactly allocated sockets: ideal for regular plugs
2 widely spaced sockets: enable you to manage with bulky plugs easily
2 Smart USB Ports: The 2 built-in Smart IC technology USB ports detect your devices automatically and deliver the fastest possible charging speed up to 5V/2.4A per port
24-month Warranty and life time technical support

Safety:
Surge Protection: Fully built-in 3-line surge protection safeguards your devices from voltage fluctuations, surges, and spikes. The green LED light makes the surge protection function visible and more reliable.

Overload Protection: automatic overload protection with double break safety switch

Heavy-duty power cord: premium protection to your electronic devices and your home/office.

Convenient:
Keyhole slots on the back: Keyhole slots on the back allow you to easily mount it to a wall or baseboard horizontally.

Flame Retardant Material:
The flame retardant material is able to withstand temperature up to 1,380℉(750℃).

Warranty:
Worry-free 24-month warranty
30-day no-hassle return & refund guarantee
Friendly customer service team

What you will get:
One power strip
One user guide
One warranty card

Specification:
Voltage Compatibility: AC 120V
Technical Parameters: 15A 60Hz
Rated Power: 1800W
Surge Energy: 2390J
Peak Current: 20000A
USB Total Max: 5V/2.4A 12W
Dimension:11.8*3.9*1.4 inch

Turn your lights on and off remotely, dim them, and even create entire lighting scenes with this plug-in lamp module. The UPB Lamp Module can be controlled remotely using a UPB Wall Controller or a UPB Dimmer Switch (both sold separately). The UPB Lamp Module plugs into your wall, but you won’t lose an outlet: The lamp to be controlled plugs into the bottom of the module, but a pass-through outlet is included as well, for a non-controlled appliance or lamp. The UML series are plug-in modules designed to dim 120VAC incandescent, halogen, LED lamps and low-voltage magnetic (and standard dimmabe electronic) transformers based on lighting scene-link commands received over the power line. 1 Watt minimum – 300 Watt maximum, configurable for on/off/dimming.

From the Manufacturer

Simply Automated Custom Expansion Series Powerful custom expansion capability – up to 250 devices using UPStart software, your PC and Computer Interface Module (PN: UMC-USB) Standard Single-Rocker Dimmer with White Faceplate. All Simply Automated dimmers work just like a regular light switch or dimmer. Magic is that they can also ‘talk’ to one another! The US11-40-W is a standard 900W dimmer with a white single-rocker faceplate. Built-in (countdown) timer option for convenience and energy savings. Optional ivory, almond, light almond, brown or black faceplates (PN: ZS11 Series) are available and easily changed. Simply Automated is an industry leader in home automation and lighting control. We provide an optimum solution for your home lighting automation needs — most complete product line in the industry, powerful UPB powerline technology and low price. Simply Automated products utilize Universal Powerline Bus (UPB) technology. Our products work over the pre-existing electrical wiring in your home. No new wires needed! Powerful custom expansion capability — up to 250 devices using UPStart software and your PC and Computer Interface Module (PN: UMC-USB). Add additional single rocker dimmers, deluxe dimmers with different faceplates (up to 8 buttons), lamp or appliance modules, tabletop pedestal with 8 buttons, wall receptacle, fixture relay, fixture dimmer or scheduler-timer. Lighting control for your entire home. Can transmit and receive scenes with other Simply Automated dimmers, plug-in modules, wall receptacle, fixture modules and other UPB devices – can control virtually any UPB device that connects to AC power wiring anywhere in the home. To ensure a proper installation in your home: – Simply Automated dimmers require both a neutral (white) and hot (black) connection. – Do not use on a 3-way circuit. – Your home should be no more than 2500 square feet and have only one breaker panel. A phase coupler is required in some home installations. – Not intended for use in multi-dwelling (condo, apartment, duplex) units.