Finding your suitable readers for sharkbite ice maker fitting is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for sharkbite ice maker fitting including detail information and customer reviews. Let’s find out which is your favorite one.
840 reviews analysed
1. SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
2. SharkBite 25024 Plumbing Installation Kit
Description
The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.
3. Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
Feature
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
Description
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
4. SharkBite 23056LF 1/2" X 1/4" Od Compression Angle Stop
Feature
- Shark Bite 1/2″ x 1/4″ OD brass barb compression chrome angle stop quarter turn 1 per bag
- Suitable for installing at the end of an ice maker supply line or waste drain
- The Shark Bite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired
Description
Shark Bite 1/2″ x 1/4″ OD brass barb compression chrome angle stop quarter turn 1 per bag. Suitable for installing at the end of an ice maker supply line or waste drain. The Shark Bite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with DZR brass and are corrosion resistant. NSF approval.
5. SharkBite U004LFA Push-Fit Straight Coupling, 1/4-Inch, BRASS
Description
Product Description
1/4″ x 1/4″, lead free, push fit coupling, Shark Bite push fit fittings for use with copper tubing cts, cpvc & PEX with integral tube liner included, constructed of ds brass, certified to 200 psi & 200 degrees Fahrenheit, design certified to ASSE1061/Nsf61 standards, meets upc, ipc & cupc requirements, fittings are listed with iapmo & are certified for use on potable & hydronic water distribution, certified for underground applications & as a manufactured joint without the need for access panels, lead free Compliant to federal law 111-380, bagged.
From the Manufacturer
SharkBite U004LFA Straight Coupling 1/4-Inch CTS x CTS Lead Free
6. Sharkbite 24985 3/4" x 1/4" Comp Tee Stop
Feature
- Instant push-fit connection for increased ease-of use. No soldering, clamps, unions, or glue required
- Fittings certified to 200 psi max and 200 degree f max. Proven durability and quality
- Integral tube liner valve for pex installations: means no loose components and ensures a secure, reliable connection
Description
The SharkBite tee stops allow the user to tap into existing supply lines to add fixtures and appliances with the speed and convenience of push-fit connections to the final phase of plumbing projects. The SharkBite tee can be used on copper, PVC, pex and pe-rt. Allow the user to tap into existing supply lines to add fixtures and appliances with the speed and convenience of push-fit connections to the final phase of plumbing projects.
7. SharkBite Deburring Pipe and Depth Gauge Tool, Copper, CPVC, Pipe, 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A
Feature
- SIMPLE: For depth insert the pipe into the gauge and mark the desired depth, then, rotate the tool around the pipe to remove burrs to achieve a clean edge and ensure a watertight seal
- USE: 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 1 inch copper or CPVC Pipe
- COMPATIBLE PRODUCT: Same as part number U702 and U702Z
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times
Description
Product Description
“
SharkBite Deburr & Depth Gauge Tool
Our 2-in-1 tool is designed to simplify your plumbing project when using copper or CPVC tubing. Use it to remove burrs from copper pipe or CPVC pipe and to mark correct insertion depth for SharkBite fittings. The mark is used to confirm that the fitting is seated correctly to ensure a watertight connection.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. No soldering, clamps, glue required. It’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. The Shark Bite PEX tubing cutters are an integral tool in the easy-to-install SharkBite Connection System.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
“
From the Manufacturer
The Cash Acme U702A Shark Bite Deburring and Depth Tool is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
8. SharkBite 23336-0000LF Shut Off Water Valve, 1/2" x 1/4", Angle
Feature
- INSTALLS IN SECONDS: 1/2 inch push-fit x 3/8 inch threaded compression angle shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
9. SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC
Feature
- INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal
- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination
- COMPATABILITY: Same as part numbers U362LFZ and U362LF
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections
- SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
Description
Product Description
Easily connect pipe in seconds with the SharkBite Push-To-Connect 1/2-Inch Tee. This plumbing fitting joins copper, PEX, CPVC, HDPE, or PE-RT pipe in any combination. With no soldering, clamps, or glue required, connections are as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the simple SharkBite disconnect tool. The SharkBite Tee is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.
SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
10. SharkBite 22222-0000LFA Ball Valve 1/2 Inch x 1/2 Inch, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
- INSTALLS IN SECONDS: 1/2 inch ball water valve requires no special tools, no soldering, no crimping or glue. Push to connect design provides an efficient application that saves time and money. Just push to create a watertight seal
- VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- LEAD FREE: Made of high quality forged lead free DZR brass.
- QUALITY: Only Shark Bite’s quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand than can ensure a clean, leak-free connection
- PERFORMANCE: 200 PSI and 200 degrees F. Use in potable water and hydronic heating applications.
Description
Product Description
SharkBite 1/2″ Ball ValveSharkBite uses high-quality brass for our 1/2″ x 1/2″ brass push-to-connect ball valve with a single ball valve handle. The full port ball valve allows water to pass through the valve easily and freely, with the reliable option to turn off the water supply fast! Quick and easy to install a new valve or to fix a leaking water pipe. Our ball valves can be easily rotated after installation making it a cinch to shut off water in an emergency or work in tight spaces.Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.CUT. PUSH. DONE. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless-steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
Conclusion
By our suggestions above, we hope that you can found Sharkbite Ice Maker Fitting for you.Please don’t forget to share your experience by comment in this post. Thank you!
