Finding your suitable readers for replacement blade for ninja blender bl820 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for replacement blade for ninja blender bl820 including detail information and customer reviews. Let’s find out which is your favorite one.
611 reviews analysed
1. Replacement Extractor Blender Bl810qsl Bl810qon
Product Highlights
- This set include 1pcs extractor blade，1pcs18OZ cup，1pcs 24OZ cup，2pcs spout lid！
- You must check the model of the machine carefully before buying it.
- This product is new original joystar design, it is just general accessories.
- This is new extractor blade，just fit NINJA ULTIMA BLENDER: BL800 30 /BL810QSL 30/BL830CB 30 /BL810QON 30/BL810 30/BL820 30/BL830 30
Description
Value for money is the ultimate aim of every person out there. You want the best you can (Or better) for the bucks you pay. In terms of Replacement Blade For Ninja Blender Bl820, Replacement Extractor Blender Bl810qsl Bl810qon would be your best bet for getting a value for money. Launched Quite time Ago Replacement Extractor Blender Bl810qsl Bl810qon was the best-sold product and even today, the sales number speak.
Having such amazing features, all this is bundled up at a cost, which may seem high for few, but is actually very good if you compare its features. Our bet is Replacement Extractor Blender Bl810qsl Bl810qon would be the Best Replacement Blade For Ninja Blender Bl820 for Money.
2. Blender Bottom Extractor Bl480 30 Bl2013
Product Highlights
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 3 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【Risk-free Purchase】 The warranty is 12 Months. We will issue full refund if you are not satisfied with the products.If there is any problem with the product, please contact us in time, we will promptly replace it for you or make a full refund.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Bottom Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【 Replacement Parts for Nutri Ninja 】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
Description
Blender Bottom Blade (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it 3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line 5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly 7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
3. Timsec Replacement Silicone Blender Compatible
Product Highlights
- [COMPATIBILITY] – Timsec Blender Rubber Gasket Sealing O-rings are compatible with models Nutri Ninja blenders BL100, BL101, BL102, BL201C, BL201, BL203QBK, BL208QBK, BL207QBK, BL206QBK, BL209, BL660 (1100w), BL663 (1100w), BL740, BL770, BL771, BL772 (1500w), BL780 (1200w), BL810, BL820, BL830, QB3000, QB3000SSW, QB3004, QB3005.
- [PREMIUM QUALIY] – Timsec Blender Rubber Gasket Sealing O-rings are Made by premium quality food grade rubber, superior toughness, easy to clean. Timsec blender cup lid is dishwasher safe and scratch resistant, safe and durable, providing a long service time.
- [DIMENSIONS] – Timsec Silicon blender blade gasket Measurements: ID 3″ (76.4mm) , Thickness 0.12″ (3mm). The black Sip Seal Lids completed with 1pc silicon O-ring, Diameter Approx. 3.15″ (8cm).
- [CUSTOMER SERVICE] – Timsec Team focus on product quality and highly value the shopping experience of our customers. Your satisfaction is our priority. If there is any problem with our blender replacement parts, please do not hesitate to contact us and We will do our best to solve the problem as soon as possible.
- [GREAT VALUE] – Timsec 16oz Blender jar lid and Blender blade Gasket Sealing O-rings perfectly fit for most 16oz Nutri Ninja blenders. Timsec blender replacement parts are perfect spare parts for your blender maintenance or replacement of wearing blender parts. You can replace the wearing parts directly and no other tools are needed during the process. Revitalize worn components now and keep your blender functioning as flawlessly as the day you brought it home.
Description
Timsec blender blade rubber gasket sealing O-rings and 16oz blender jars Sip Seal lids perfectly fit for most 16oz Nutri Ninja blenders.
Timsec extractor blender replacement parts can refresh your old blender and extend blender’s service life with very little time or effort, and save much money.
COMPATIBLE MODELS: Compatible with models of Nutri Ninja blenders BL100, BL101, BL102, BL201C, BL201, BL203QBK, BL208QBK, BL207QBK, BL206QBK, BL209, BL660 (1100w), BL663 (1100w), BL740, BL770, BL771, BL772 (1500w), BL780 (1200w), BL810, BL820, BL830, QB3000, QB3000SSW, QB3004, QB3005.
PACKAGE INCLUDED: 4Pcs x Silicone Rubber Gaskets 2Pcs x 16oz Sip Seal lids
Legal Disclaimer:
All references including brand names, logos, part numbers, or models are for convenience only to aid the consumer in choosing alternative compatible parts.
Timsec Replacement Parts are NOT ORIGINAL PARTS but meet or exceed the original manufacturer part specifications.
4. Veterger Replacement Assembly Compatible Blender
Product Highlights
- Made of food grade PP and stainless steel
- This blade is Only fit for Ninja 16oz Cup with 4tabs (Not fit 18oz, 24oz, 32oz)
- Package include: 1 blade
- The blade only compatible with ninja blender BL810QSL 30/BL810QON 30/BL810 30/BL820 30/
- The replacement blade has been well-tested by the manufacturer.
Description
Veterger Replacement Assembly Compatible Blender is a veteran in the market and has been here for a long time. It offers something of a unique feature which no other competitor offers.
Go for Veterger Replacement Assembly Compatible Blender if you want to try out something of a fusion of new and classic. Fun & Interesting Fact about Replacement Blade For Ninja Blender Bl820 is that even though Veterger Replacement Assembly Compatible Blender is a veteran, the users are mostly younger generation. You can say fashion makes a turn after a century or so and things repeat.
5. Gaskets Replacement Blender Bl663co Bl773co
Product Highlights
- 【Purchase of Confidence】– If any of our products fail to meet your expectations, please don’t hesitate to drop us an email and we will give you a satisfactory solution. We will send you a new replacement or make the refund to your convenience.
- 【Quality Rubber Gascket O-Ring for Ninjia Blender Replacement】– The Replacement Gascket O-Ring is made of food grade Rubber,safe and Durable. 5 packs in total to suit for your daily use and replacement.
- 【Easy to replace and clean】Flexible Rubber O-ring, easy to clean. Just replace the old seal ring to keep your bottom blade cleaning and leakproof.
- 【Size of the white Gaskets】– Diameter: 3.13in, Thickness: 0.14in as shows in the picture.
- 【Fit For Ninja Pro Extractor Blade Assembly】– The Gascket Replacement seal ring is compatible with The Nutri Ninja Extractor Blade Assembly Model303KKU, 307KKU, 356KKU800, 322KKU770,357KKU800,476KKU3000, Ninja BL660,BL740,BL663,BL663CO,BL665Q,BL610,CT610,CT610C,NJ600,BL770,BL770W,BL771,BL771C,BL772,BL772Q,BL773CO,BL773CCO,BL780,BL770A 30,BL770 30,BL773CO 30,BL771 30,BL772 30,BL780 30,BL780C0 30,BL810,BL810C,BL810Q,BL820,BL830,QB3000,QB3000SSW,QB3004,QB3005.
Description
If you are buying a Replacement Blade For Ninja Blender Bl820 for the first time, then you should have Gaskets Replacement Blender Bl663co Bl773co. It has fewer features when you make Replacement Blade For Ninja Blender Bl820 comparisons of Gaskets Replacement Blender Bl663co Bl773co with any other Replacement Blade For Ninja Blender Bl820 but what it has is ease of use and best in class service. Go ahead and Grab a Replacement Blade For Ninja Blender Bl820, grab any Replacement Blade For Ninja Blender Bl820 but if you are first time user and want a good experience do not look anywhere other than Gaskets Replacement Blender Bl663co Bl773co
6. Ninja Single 16 Ounce Professional Blender
Product Highlights
- BPA Free Plastic Construction.
- These cups fit these model number blenders. (The model number is located underneath the base of the blender and must start with a BL) : BL660 (1100 watt), BL663 (1100 watt), BL740, BL770 BL771 BL772 (1500 watt), BL780 (1200 watt), BL810 BL820 BL830
- Ninja 16oz Cups with “FOUR TABS” Please make sure before buying that the cups you are replacing have “4 TABS”.
- Ninja Single Serve 16 ounce Cups. Include Two Replacement 16-Oz. Single Serve Cups and Two Sip Lids
- Dishwasher Safe.
Description
These Ninja single serve cups with convenient to-go lids are designed for use with the Ninja BL660 Professional Blender & Single Serve. Includes two replacement 16-oz. single serve cups and two lids. BPA-free plastic construction.
7. Blender Replacement Single Compatible Professional
Product Highlights
- 【PACKING INCLUDES】Includes two replacement 16-oz single serve cups and two sip and two Sip N seal lids (6 pack set).
- 【NOTICE】We make no claims that these are original NinjaBullet products,but they work just like the original.We offer 3 MONTHS WARRANTY, true worry-free shopping experience. If any issues, questions or concerns,please feel free to contact us.
- 【BPA FREE AND HIGH QUALITY】BPA Free and Dishwasher Safe. The Nutri Ninja 16 OZ replacement cups are Made of Eco-friendly & non-toxic materials.
- 【FITMENT】 COMPATIBLE WITH Ninja blender BL660 (1100W), BL663 (1100W), BL740, BL770 BL771 BL772 (1500W), BL780 (1200W), BL780co, BL810, BL820, BL830. Please ensure product compatibility.
- 【EASY TO USE】Simply attaches to Pro Extractor Blades included with your blender. The Pro Extractor Blades are able to crush through whole fruits, vegetables, nuts, seeds, and ice.
Description
Blender Replacement Single Compatible Professional is another one which falls under Replacement Blade For Ninja Blender Bl820 for money. It is most regularly advertised product and we see ads of it almost everywhere. In the past, Blender Replacement Single Compatible Professional ’s parent company decided to launch a new line of Replacement Blade For Ninja Blender Bl820 and that is what has revived them. Blender Replacement Single Compatible Professional has really upgraded itself to the current style and market changes and the best part of Blender Replacement Single Compatible Professional is amazing features.
8. Extractor Blades Replacement Bottom Blender
Product Highlights
- ⭐ 7 FINS work with: NN100,NN100A,NN101,NN101-30,NN102,NN210,BL450-30,BL454Q,BL480-30,BL481-30,BL482-30,BL483-30,BL485,BL486CO,BL487,BL487A,BL487T,BL488W,BL490,BL491,BL492,BL492W,BL493,BL494,BL494C,BL641,BL680A,BL680A-30,BL682,BL682-30,BL682W,BL487CO,BL2012,BL2013,CT640,CT641,CT680,CT680A,CT680W,CT680SS,etc
- ⭐ NO need sharpening.
- ⭐ 100% Brand new and high-quality gear threaded. Only fits 18oz, 24oz, 32oz cups.
- ⭐ Does Not work with: BL660, BL663, BL685-30,BL740, BL770. BL771, BL772, BL773CO, BL780, BL810, BL820, BL830, BL450, BL451-70, BL454-70, BL482-70, BL480, BL480D 30.
- ⭐ Made of high-quality materials. Food grade 304 stainless steel. Rust resistant. Leak-proof high-quality silicone gasket.
Description
Extractor Blades Replacement Bottom Blender is present in top 10 since a long time. In terms of customer satisfaction and ease of use, Extractor Blades Replacement Bottom Blender wins the users. Most of them who buy Extractor Blades Replacement Bottom Blender once wont by anything else although it offers very limited features and specifications.
The only reason for brand loyalty is ease of use. This product had a special mention in Reviews of Replacement Blade For Ninja Blender Bl820 in 2020 for not expanding user base but definitely not loosing any. The shift of people from Replacement Blade For Ninja Blender Bl820 to any other Replacement Blade For Ninja Blender Bl820 is least.
9. Lurico Replacement Compatible Extractor Bl682 30
Product Highlights
- 【Packing Include】1x7Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- 【Tight Sealing】Our gasket is installed already in this replacement blade, you can use the blade without any other operation. Pls note that the gasket may be loose during transportation. Pls check it before use and make sure it is put tight into the replacement bottom blade
- 【Preminum Quality】Made of high quality, food-grade PP, Resists rust and dulling over time. Durable rubber gasket for leak-proof blending. Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe
- 【Compatible Model】AxPower 7 fins extractor blade is compatible with Nutri Ninja Auto-iQ: NN100, NN100A, NN101, NN101-30, NN102, NN210, BL450-30, BL454Q, BL480-30, BL481-30, BL482-30, BL485, BL486CO, BL487, BL487A, BL487T, BL491, BL492, BL492IS-30, BL494, BL640-30, BL641-30, BL642-30, BL681A, BL681C, BL682-30, BL682QT-30, BL685-30, BL687CO-30, BL680A-30, (Please confirm your blender need 7 fins replacement blade before purchasing). Only fit for 18/24/32OZ cups, Not fit for 16OZ
- 【No Suitable for】 Please don’t order our 7 fins blade for these model: BL660, BL663, BL740, BL770, BL830, BL771, BL773CO, BL780, BL820, BL450, BL451-70, BL454-70, BL482- 70
Description
Lurico Replacement Compatible Extractor Bl682 30 is again a mid of quality and price. It offers limited features in this pricing. There is another variant of Lurico Replacement Compatible Extractor Bl682 30 which falls into premium category but Lurico Replacement Compatible Extractor Bl682 30is specifically targeted for mid-segment.
Lurico Replacement Compatible Extractor Bl682 30 offers such a amazing features which makes it better than 70% of Replacement Blade For Ninja Blender Bl820 available in the market today. Lurico Replacement Compatible Extractor Bl682 30 was our personal favorite and was voted as most admired product in TOP 10 Best Replacement Blade For Ninja Blender Bl820 to Buy in 2020 – TOP Picks. We hope it makes to that list again this year.
10. Blender Replacement Compatible Bl773co Gasket
Product Highlights
- Blade Replacement-6 Fins, 3.35″/8.5CM diameter, 170g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! )
- Includes: 1x 6 Fins Bottom Blade Replacement, 1 x Replacement Gasket Rubber ( One Gasket Rubber already on the 6 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 6fins.
- 100% brand new and high quality: Food Grade Plastic, BPA Free & Dishwasher Safe.
- Important Tips: Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- Replacement Extractor Blade with Gasket: Compatible with 6 fins Nutri Ninja Auto iQ Blender BL660 BL770 BL771 BL772 BL773CO and BL780 (Please confirm your blender need 6 fins replacement blade before purchasing).
Description
Blender replacement parts for Nutri Ninja Blender is a perfect mold without leaking, easy installation, unique design high quality environmentally friendly product.
Product Specifications:
Amount of Fins: 6 Fins
Blade Material: Food Grade Plastic and Stainless Steel
Diameter: 3.35 in / 8.5CM
Package Included:
1 x Blender Replacement Blade
1 x Gasket Rubber
Fit blenders models for Nutri Ninja Blender:
Nutri Ninja Pro Blender BL660 BL770 BL771 BL772 BL773CO BL780.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten itv.
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage.
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line.
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal.
6. Please make sure it in right place and locked tightly.
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
