Top 9 Refrigerator Wate Line

Product Description

This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

Product description

Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.

From the Manufacturer

LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

Product Description

This is a genuine replacement part.

From the Manufacturer

Refrigerator water supply kit includes everything needed for easy installation and fits most refrigerators. Refrigerator water supply kit provides water to ice makers, ice and water dispensers, freestanding ice makers, humidifiers, and evaporator coolers. Refrigerator water supply kit contains one 5-Feet pex tubing and fittings.

Product Description

The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product Description

The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.

Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.

Product Description

This is a Genuine Replacement Part, The Model Number and Name for The Following Item: General Electric (GENF0) WX08X10015 Refrigerator Water Line.

From the Manufacturer

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WX08X10015 Refrigerator Water Line

This fridge water line connection and filter kit is an economical option for most refrigerators with a water dispenser and/or icemaker. Easy to install using our included quick connect fittings. Can be conveniently placed in many locations such as behind your refrigerator, under your sink or cabinet. Can also be used for beverage equipment, icemakers, water fountains, and under the counter systems. Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I.

PureWater Filters™ Inline Water Filter Kit for Refrigerators Includes:

• NEW Filter (with Quick-Connect Fittings)
• 15 Feet of 1/4″ NSF Certified Water Line
• 1/4″ Shutoff Valve
• Two Quick Connect Water Line Adapters,
• Mounting Bracket with Screw, and
• Installation Instructions with Graphics

The PureWater Filters™ Promise: Rest assured, all of our products come with:

• Lifetime Warranty for Defective or Malfunctioning Parts, and
• FREE Lifetime Telephone Support – Get help with installation, trouble-shooting tips, and answers to product related questions.

* Service life on filter is 1,500 gallons / 1 Year. For replacements use PureWater Filters Model No. PWF10