Nowadays, there are so many products of norco refrigerator thermometer controller in the market and you are wondering to choose a best one.You have searched for norco refrigerator thermometer controller in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings norco refrigerator thermometer controller which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
799 reviews analysed
1. Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Description
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
2. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
3. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
4. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
5. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
Feature
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
6. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
7. Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling
Feature
- [Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- [Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- [Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
Description
Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year
Package Included:
1 x Temperature and Time Controller
1 x Manual
8. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
9. Inkbird ITC-308S Aquarium Heating and Cooling Dual Stage Temperature Controller Freshwater Saltwater Aquarium Tropical Fish Ornamental Shrimp
Feature
- ????????【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
- ????????【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
- ????????【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
- ????????【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
- ????????【Term of service】Purchase products and get a one-year warranty.
10. Inkbird ONLY Heating Thermostat Digital 110V, 1100W Heater Temperature Controller 10-42°C / 50-108°F with NTC Sensor, ℉ and ℃ Display c206 NO Timer Function (C206)
Feature
- ONLY Heating Thermostat Heater Temperature Controller.
- Support reading with Centigrade or Fahrenheit and Temperature calibration. Plug and play design, easy to use.
- Be able to display 3 different details such as the measured temperature, the low and high temperature at the same time.
- The NTC stainless probe is waterproof, IP68 Grade. Its diameter is 1.57”x 0.2”.
- Keep your desire temperature for your seed heat mat, aquarium heater, brewing heater, etc.
Conclusion
By our suggestions above, we hope that you can found Norco Refrigerator Thermometer Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
