Top 9 Ice Maker Water Outlet Box

0

Finding your suitable readers for ice maker water outlet box is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ice maker water outlet box including detail information and customer reviews. Let’s find out which is your favorite one.

540 reviews analysed

1. Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White

Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

2. Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White

Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

3. Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box, 1/2-Inch Connection with 1/4-Turn Ball Valve, White

Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box, 1/2-Inch Connection with 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection

This outlet box comes complete with a 1/4-Turn Ball valve installed, pre-loaded reversible nails which provide a strong rigid mount, and a faceplate cover. It does not need a support bracket, and the outlet box can be installed to the left or right stud bay. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

4. Oatey 39130 1/2" FIP ICE Maker Box

Oatey 39130 1/2" FIP ICE Maker Box

Feature

Description

Product Description

12K ice maker box with nails preloaded. Right or left hand installation. Provides quick, safe water supply and shutoff for refrigerator ice maker and water dispenser. Valves comply with requirements of NSF 61, Section 9. No support needed. Box dimensions: 3.20″ W. x 4.15″ H. x 2.35″ D. Faceplate dimensions: 5.00″ W. x 5.89″ H. x .50″ D. U.S. patent No. D428.117. Canadian patent No. 90133. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.

From the Manufacturer

Oatey products can be found in residential and commercial applications and have achieved excellent brand name recognition with consumers. All products are backed with the highest quality technical and customer support programs in the industry

5. Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe

Feature

Description

Style:Without Water Arrestors

The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.

6. Eastman 60241 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve and Hammer Arrester, White

Eastman 60241 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve and Hammer Arrester, White

Feature

Description

This Eastman 60241 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

7. Eastman 60242 Pre-assembled Ice Maker Outlet Box, 1/2-Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve and Hammer Arrester, White

Eastman 60242 Pre-assembled Ice Maker Outlet Box, 1/2-Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve and Hammer Arrester, White

Feature

Description

This Eastman 60242 Crimp PEX Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

8. Eastman 60234 Pre-assembled Ice Maker Outlet Box, 1/2-Inch CPVC with Installed 1/4-Turn Ball Valve, White

Eastman 60234 Pre-assembled Ice Maker Outlet Box, 1/2-Inch CPVC with Installed 1/4-Turn Ball Valve, White

Feature

Description

This Eastman 60234 Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

9. Water-Tite 87967 1/2" Sweat 1/4 Turn Ice Maker Box, White

Water-Tite 87967 1/2" Sweat 1/4 Turn Ice Maker Box, White

Feature

Conclusion

By our suggestions above, we hope that you can found Ice Maker Water Outlet Box for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general