Top 10 Hp Honda Coolant

Engine Coolant / Antifreeze Genuine 97121001001

The EK-CryoFuel is a new revolutionary coolant for PC liquid cooling systems. EK-CryoFuel is the most chemically stable coolant that provides enthusiasts and gamers with the best possible level of performance and thermal efficiency with emphasis on color stability. EK-CryoFuel coolant is a pure, non-toxic coolant based on the patent pending chemical formula, which prevents the creation of any sediments in the liquid cooling loop. Liquid cooling users can rest assured that the EK-CryoFuel coolant, with its very low viscosity, will not clog or damage their water blocks and other parts of the loop when used with EK-DuraClear or EK-ZMT tubing.

Does not contain ethylene glycol or a bittering agent.

Model: 3831109813256

The EK-CryoFuel is a new revolutionary coolant for PC liquid cooling systems. EK-CryoFuel is the most chemically stable coolant that provides enthusiasts and gamers with the best possible level of performance and thermal efficiency with emphasis on color stability. EK-CryoFuel coolant is a pure, non-toxic coolant based on the patent pending chemical formula, which prevents the creation of any sediments in the liquid cooling loop. Liquid cooling users can rest assured that the EK-CryoFuel coolant, with its very low viscosity, will not clog or damage their water blocks and other parts of the loop when used with EK-DuraClear or EK-ZMT tubing.

This 100mL concentrate is to be mixed with distilled water in ratio 1:9 to form 1L of ready-to-use coolant. 

Does not contain ethylene glycol or a bittering agent.

Model: 3831109813300

Maxima Coolanol is a ready-to-use 50/50 blend of premium quality ethylene glycol based antifreeze and deionized water to provide optimum rust and corrosion protection for all aluminum and magnesium motorcycle and ATV liquid cooled engines. Coolanol also contains anti-foam agents to reduce water pump cavitation and increase cooling capacity. Coolanol 50/50 blend protects from freeze-ups in winter down to -34 Degree Fahrenheit. Coolanol also raises your cooling systems boiling point to 265 Degree Fahrenheit with a 15 pound radiator cap. This extremely low-silicate fluid is ideally suited for all motorcycle applications. Contains bittering agent.

Valvoline ZEREX G-05 antifreeze coolant is a long life, fully formulated, ethylene glycol-based fluid suitable for passenger cars, light trucks and heavy duty vehicles. The formulation is designed for both gasoline and diesel engines. Its lower-silicate, reduced pH, phosphate free European technology protects all cooling system metals, including aluminum, from corrosion. ZEREX G-05 is a nitrite containing coolant designed to protect diesel engine cylinder liners from cavitation. It contains deposit control additives for protection from hard water deposits and scale. The ASTM and other test data shown on this sheet reflect the high performance corrosion inhibitor package. When diluted 50% with water, ZEREX G-05 protects modern engine components from winter freezing and summer boil over. A 50% to 70% concentration range is suggested for optimum corrosion protection. ZEREX G-05 is compatible with other premium brands of coolant commonly available. It contains a high quality defoamer system and will not harm hoses, plastics or original vehicle finishes. It is also suitable for use in Cummins Deere, Detroit Diesel, Mercedes, MTU, CAT, Navistar, Isuzu and Yanmar diesel engines. ZEREX G-05 is approved by Ford North America for newer models. Call 1-800- TEAM-VAL with questions. ZEREX G-05 antifreeze coolant is approved, meets or exceeds the performance requirements of the following antifreeze specifications and/or is recommended: ASTM D3306 Cummins 14603 Approved ASTM D6210 GM 1899M GM 1825M MTU / DDC Approved Mercedes Benz Approved Perkins Diesel CAT EC-1 Mack Paccar TMC of ATA RP-329B Federal Specification A-A-870A Chrysler MS 9769 Approved Ford WSS-M97B51-A1 Approved Detroit Diesel 7SE298 Approved John Deere & Co. Approved GE Wind Turbines Approved Navistar

Evans specialty Non-Aqueous Propylene Glycol Coolant, (NPG) high performance waterless coolant, EC10064, is specifically designed for racing venues that allow propylene glycol based coolants, but not ethylene glycol and food service equipment where ethylene glycol products are contraindicated. Evans waterless coolants have a boiling point above 375 degree and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components. NPG contains no oxygen, effectively eliminating corrosion, liner and cooling pump erosion, resulting in reduced maintenance costs. It also eliminates pre-ignition and detonation caused by overheating, reducing downtime, improving combustion efficiency, and delivering more power. Provides low temperature freeze protection with a freezing point below -40F. Evans NPG is the original waterless coolant and is a lifetime coolant. NPG is recommended for racing engines that run on Tracks or in series where there is a “no ethylene glycol” rule, and can be used in high performance street vehicles with high flow cooling systems. NPG is not recommended for daily drivers or cold weather operation, and may require system modifications to ensure a successful conversion. Evans prep fluid should be used to ensure all residual water is removed from the system before adding Evans waterless coolant.

Evans High Performance Waterless Engine Coolant, EC53001, is specifically designed for all modern, classic, and vintage gasoline engines, light duty diesels, LP and CNG vehicles. Evans High Performance Coolant (HPC) defends against boil-over and corrosion while allowing the engine to continue producing its peak horsepower. When converting an engine from a water-based coolant to HPC, great care should be given during the installation (conversion) process to ensure that all of the old water-based coolant and water is removed before installing HPC. It is recommended that the system be flushed with Evans Prep Fluid prior to installing HPC When the installation is complete, the water content of the coolant should be no more than 3 percent for optimum performance. Evans HPC coolant contains a bittering agent/bitterant. Evans coolant is proudly made in the USA.

Dorman Products, Inc. is well-known as a leader in providing quality auto parts to the aftermarket. We’ve earned our reputation for excellence from over three decades of experience in providing automotive replacement parts, fasteners and service line products primarily for the automotive aftermarket. Our prestigious position stems from a unique combination of application expertise, innovative product design, and breadth of product offerings, many of which are not conveniently or economically available elsewhere. At Dorman, we take pride in the quality of our products and in your satisfaction.

EVANS Cooling Systems EC55001 Extreme Duty Waterless Engine Coolant, 128 fl. oz. Evans coolant contains a bittering agent/bitterant. Evans coolant is proudly made in the USA.