Top 10 Honda Hp Engine

Pressure washersCommercial lawn and garden equipmentTillers / cultivatorsGeneratorsForestry equipmentConstruction / industrial equipmentAgricultural equipmentSmall vehiclesWater pumpsFuel Efficient, High Output OperationDigital CDI ignition system with variable timingIncreased compression ratio | Learn MorePrecision camshaft design offers precise valve timing and optimal valve overlap for better fuel efficencyOHV design for increased efficiency and optimal power transferSmooth PerformancePrecision engineered components result in lower vibrationBall bearing supported crankshaft for greater stabilityHeavy duty balancer shaftImproved piston designExceptionally QuietLarge capacity, multi-chamber exhaust systemImproved camshaft and muffler reduce overall engine noise by up to 5 dBForged steel crankshaft and rigid crankcaseHelical cut gearsSophisticated air intake systemProven ReliabilityOil AlertCast iron cylinder sleeveHigh quality materials, fit, and finishDual element air cleanerFuel Valve3-Year Limited WarrantyEasy to Use and MaintainSimple throttle controlLarge fuel tankLarge automotive type fuel capDual oil drains and fillEasy, convenient, heavy duty control boxEasily accessible spark plugHeavy duty recoil starterAutomatic mechanical de-compression system | Learn MoreVariable ignition timingCARB and EPA certifiedNo catalyst necessary Engine Type: Air-cooled 4-stroke OHV Bore x Stroke: 88 X 64 mm Displacement: 389 cm3 Net Power Output: 11.7 HP (8.7 kW) @ 3,600 rpm Net Torque: 19.5 lb-ft (26.4 Nm) @ 2,500 rpm PTO Shaft Rotationa: Counterclockwise (from PTO shaft side) Compression Ratio: 8.2:1 Carburetor: Butterfly Float Type Ignition System: Digital CDI with variable timing Lubrication System: Splash We ship to the 48 States only.

This genuine 208cc Briggs & Stratton single cylinder engine offers dependable power for your equipment needs. With a power rating of 9.50 gross torque, this engine features a premium dual clean air filtration system and maintenance-free Magnetron electronic ignition. With a manufacturer limited warranty of 2 years consumer use / 90 days commercial use, Briggs & Stratton provides power that you can trust. This engine includes a Dura-Bore cast iron cylinder sleeve for extended life. This engine includes an installed muffler. This engine includes a fuel tank.

Replacement Honda GX200 6.5 HP Long Block Engine Crankcase with Cylinder Head ValvesFits: Honda GX200 6.5HPIncludes: Engine Block with Piston and rings, Piston Pin, Connecting Rod, Crankshaft, Crank Seals, Crankcase Cover, Camshaft Balancer, Shaft, Low Oil Sensor, Governor, Oil Dipstick/Fill CapTop Quality OEM Replacement Parts

The Honda 196cc GX200 Series horizontal engine produces 9.1-pound-Feet (12.4 Nm) at 2,500 rpm net torque. Completely redesigned for 2011, the new GX200 offers lower noise levels, lower vibration, and lower emissions – without sacrificing power output or performance. And the new GX200 essentially matches the dimensions of the previous model, so no modifications to existing equipment designs are necessary. The GX200 features fuel efficiency and high output operation Honda means proven reliability with features like oil alert, carburetor chamber coating and carburetor filter help to protect against fuel impurities, cast iron cylinder sleeve, dual element air cleaner and fuel valve. Always easy to use and maintain with the simple throttle control, large fuel tanks, large automotive type fuel cap, dual oil drains and fill, easy, convenient, heavy duty control box, and easily accessible spark plug. Easy, reliable starting every time with heavy duty recoil starter, ergonomic, easy to grip recoil rope design, and automatic mechanical de-compression system. This engine is emissions compliant, CARB and EPA certified. Engine Type: Air-cooled 4-stroke OHV. 68 by 54 mm bore and stroke. 196 cm3 displacement. Net Power Output: 5.5 HP (4.1 kW) at 3,600 rpm. Net Torque: 9.1-pound-Feet (12.4 Nm) at 2,500 rpm. PTO Shaft Rotation counterclockwise (from PTO shaft side). Compression Ratio: 8.5:1. Butterfly carburetor. Transistorized magneto ignition system. Recoil Starter starting system. Splash lubrication system. Mechanical governor system. Dual element air cleaner. Oil Capacity: 0.63 US quart (0.6l). Fuel Tank Capacity: 3.3 US quarts (3.1 liters). Fuel: Unleaded 86 octane or higher. Dry Weight: 35-pounds. (16.1 kg). Common applications: Pressure washers, commercial lawn and garden equipment, tillers / cultivators, generators, construction / industrial equipment, agricultural equipment, small vehicles, water pumps.

Description: Starter
OEM(s): Denso
Voltage: 12
Power: 0.8kW / 1.07HP
Condition: New
Rotation: CCW
Starter Type: PMGR
Number of Teeth: 12
Gear OD: 1.457in / 37mm
Mtg Ear 1 Hole: 8.0mm Unthreaded
Mtg Ear 2 Hole: 8.0mm Unthreaded
Warranty: 1 Year
Weight: 8.38 lbs / 3.81 kg
Pictures:
Pictures are not always of the exact product. Sometimes an OEM picture may be used or a different color product (ie gray alternator, but black one in picture) but the purpose of the picture is to provide you with the style and specs of the product. If you aren’t sure if the pulley is included please confirm prior to purchasing. We sell pulleys as well so if the item doesn’t include pulley we likely would be able to supply pulley. If one of our products is OEM we state it as such in the part brand section of item specifics. We sell OEM and aftermarket products. If you aren’t sure please ask prior to purchasing.
Shipping Times:
Please note that shipping times are estimates. We ship from multiple locations and generally our product arrives faster than the estimated times but on occasion that won’t be the case. If the nearest location to you doesn’t have item on hand, we will ship from the nearest location that does have it. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. If you order on a Friday at 4 pm central time your product will not ship until Monday. We ship our Amazon orders up until 4 pm central standard time. Again, if you need faster please order accordingly. We do not ship product on weekends or holidays.

Replacement for HONDA GX340 11HP & GX390 13HP MUFFLER ASSEMBLY WITH HEAD SHIELD MANIFOLD & TWO GASKETS
Fits Honda GX340 11HP & GX390 13HP Engine Motors
Replace OEM : 18310-ZE2-W61

Package include:
1 x Muffler, 1 x Exhaust Pipe, 2 x Gaskets

About Quality:
We have the great confidence with the quality of our parts and provide 6months warranty too. And if you unsatisfy with our product, you can return to our USA warehouse, no risk.

For your toughest pumping challenges, the Pacer SE2UL E5HCP gas-powered dewatering pump is the tool you need. This pump packs a punch with a powerful 160 cc engine, allowing it to transfer water and mild agricultural chemicals at a maximum flow of 200 GPM, a maximum TDH of 120 feet and a maximum pressure of 50 PSI.

Features include:

• A glass-reinforced polyester body, impeller and volute, which protect against product corrosion
• EPDM elastomers, which resist elongation and excessive wear
• Chemical-resistant stainless steel internal hardware
• A gasoline-powered 5.5 HP Honda GX160 engine with a 0.5-gallon tank, protected by the Honda Oil Alert® Warning System
• An EPDM-fitted stainless steel shaft seal, with carbon and ceramic faces
• 2” female NPT ports
• A built-in check valve
• A self-cleaning double volute, which prevents solid debris from harming the pump during pumping

Since the pump can handle a large number of liquids without excessive wear or chemical corrosion, it’s ideal for a wide range of uses — particularly within the agricultural industry. Some of its applications include:

• Dewatering
• Filling and draining pools
• Transferring water, pesticide, fertilizer and mild chemicals
• Aerating lakes and ponds
• Pumping out marine bilge areas
• Seeding and irrigation
• Providing fire protection

To keep your gas-powered water pump in top shape, use it only with chemicals approved for use with stainless steel, polyester and EPDM parts. After your pump handles any fertilizer or chemical, be sure to flush it out thoroughly with clean, fresh water. Flush out the pump with water and drain it thoroughly before storing. Do not use any petroleum-based products when preparing the pump for storage, as petroleum will ruin the EPDM pieces.