Nowadays, there are so many products of gas appliance regulator in the market and you are wondering to choose a best one.You have searched for gas appliance regulator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings gas appliance regulator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
939 reviews analysed
1. WOLF 1/2" NPT Natural Gas Pressure Regulator 3" to 6" water column range 712371
2. Maxitrol RV48L Natural Gas Pressure Regulator, 1" In and Out Opening, 3/4" FPT Thread,1/2 PSIG Inlet Pressure, 3"-6" WC Outlet Pressure
Feature
- GAS TYPE & PRESSURE – Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3″ – 6″ Water Column
- PIPE THREAD SIZE – 3/4″ Inlet & 3/4″ Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture’s table.
- CAUTION – This regulator has 1″ openings for 3/4″ gas pipes. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- MARKING – Model: RV48L, Marking: 1/2 PSIG, Po 3″ – 6″. Inlet pressure 1/2 PSI. Adjustable outlet pressure 3″-6″ Water Column.
- OPERATE TEMPERATURE – 32°F – 225°F (0°C – 107°C), Indoor Only, Not for outdoor usage. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Description
Maxitrol Pressure Regulator for Natural Gas (NG)
Product Description:
- Brand: Maxitrol
- Gas type: Natural Gas (NG)
- Refer to the pictures on how to find the correct pipe thread size. This regulator has 1″ openings for 3/4″ gas pipes. 3/4″ IN and 3/4″ OUT Female Pipe Thread. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar).
- Outlet pressure range: 3” – 6” Water Column
- Ambient operating temperature range: 32°F – 225°F (0°C – 107°C).
Attention:
- NOTE: GAS PRESSURE REGURATORS WILL NOT TURN OFF THE FLOW OF GAS.
- The pipe fittings for this regulator are based on NPT pipe threads – dimensions according ANSI/ASME B1.20.1 standards.
- Install the regulator properly with gas flowing as indicated by the arrow on the casting.
- *NOTE – Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
How to find the correct pipe thread size
- WARNING: The NPT thread size is NOT referring to the size of the thread itself!
- The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe.
- Measuring the pipe will often mislead you into choosing the wrong pipe size.
- The “pipe thread size” is measured and based on the inside of the pipe.
- A lot of people measured the thread / the opening for the thread / outside diameter of the pipe, and thought that was the thread size. It was WRONG.
- The NPT thread is referring to the Interior Diameter of the pipe.
3. MAXITROL 325-3L (1/2" W/12A09) Regulator,Gas Pressure
Description
Industry Standard
4. MENSI 3/8" NPT Regulator For NG Gas NPT Natural Gas Low Pressure Regulator 5" water column range
Description
Low Pressure Regulator 30000BTU/hr 3/8″ NPT NG regulator 5″ Outlet pressure
5. Dormont R48N42-0306-3.5 2500 Natural Gas Regulator, 3/4" Diameter
Description
Dormont R48N42-0306-3.5 2500 Natural Gas Regulator, 3/4″ Diameter. Genuine OEM replacement part. Dormont offers a full range of solutions for all your gas connectivity applications. Use genuine OEM parts for safety reliability and performance.
6. GASPRO 4FT 20 PSI Adjustable High Pressure Propane Regulator with Hose, LP Gas Grill Regulator Hose with 1/8 MNPT Pipe Fitting for QCC1 Tank,Fits for Grill,Burner,Turkey Fryer,Cooker,firepit and More
Feature
- High pressure 0-20 PSI adjustable propane regulator with 4-feet/48inch hose. (120,000 BTU/Hr). It creates small and large flames quite well.
- Used for propane burner, grill, turkey fryer, gas cooker, outdoor cooking stove, heater, smoker, firepit, griddle and more high pressure applications, Not suitable for appliances which need low pressure regulator.
- 3/8″ Female Flare Fitting has an outside diameter of 5/8″, come with pipe fitting 3/8″ flare M x 1/8″ MNPT.
- Acme nut connects to QCC1/ Type 1 propane tank.Provides secure, airtight connection between LP appliance and propane cylinder.
- The propane regulator is CSA Safety Certified to ensure a quality experience
Description
★ Product Specification
-High pressure LPG hose
-Inlet Pressure:25-250PSIG
-Outlet Pressure :0-10PSIG
-Flow Capacity :122000 BTU/Hr
-Certificate: CSA
-Length of hose:4feet/48inch
★ How to use it?
1.The male end connects a standard size propane QCC-1/Type-1 tank and the female end attaches to a 3/8inch flare fitting.
2.The red knob can be regulated the gas flow and pressure.( Adjustable pressure range: 0-20PSI )
3.Installs is not complex at all, even you don’t need any tool required.
★ What equipment can it be used for?
Fits most propane grill, stove, smoker, burner, heater, fireplace, fire pit, cooker, turkey fryers,torches and variety of high pressure applications
☻Warm Tips
In order to use this product more safely, please adjust the regulator to 0 PSI (Off the regulator) firstly before you use.
7. GasOne 2113 QCC-1 Type Hose-CSA Certified-Works with Newer U Gas One 4FT High Pressure Propane 0-20 PSI Adjustable Regulator with 4, Steel Braided
Feature
- USER FRIENDLY – This Regulator & STEEL BRAIDED Hose 0-20 PSI adjustable output is must have item for your propane burners, turkey fryers, heaters, smokers and all other propane appliances, Easy to use and good for secure gas flow, No gas leak, Simply connect and go, Extremely reliable
- DURABLE AND STURDY CONSTRUCTION – The Steel Braided hose measures 4FT (48in) long and fits type-1 (QCC-1) tank connections, Long lasting and reliable, Goes for a long time, Heavy-duty and good for use with high-pressure burners
- COMPLETELY SAFE- CSA Listed Regulator/Hose for use on turkey fryers, smokers and much more, Good for use with any burners compatible with fit, Ensures safe gas flow
- STANDARD FITTING – 3/8-inch flare fitting has an outside diameter of 5/8 inches in order to accommodate for the flare seat, Trouble-free and has easy attachment
- NOTE- Tools are required for secure leak free connection to your propane appliance, Output of adjustable 0 to 20PSI
Description
he high pressure propane regulator with hose is designed to be used with high pressure propane burners. The 2113 model is adjustable and has an output of 0-20 PSI. This regulator with hose has excess flow protection for your safety and will automatically shut off.
8. Dormont 0222530 SmartSense Gas Range & Furnace Appliance Connector Kit, 48 In. Long, 5/8 In. Outside Diameter, Yellow Coated
Description
This kit contains 48 IN yellow coated corrosion resistant SS gas connector 1/2 IN MIP-tapped 3/8 IN FIPx3/4 IN MIP-tapped 1/2 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution, This CSA approved gas connector is often used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 5/8 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. SmartSense self resets to standard rate of flow after gas line restoration and pressure equalization. The internal thermal ring expands to stop gas flow in temperatures ranging from 350-425 degrees F.
9. Vulcan Hart 408279-25 3/4 Natural Gas Pressure Regulator
Feature
- Genuine OEM replacement part
- Vulcan Hart has years of experience in the commercial foodservice industry and provides high quality kitchen equipment
- Genuine OEM provides safety, reliability, and optimal performance
- Approved by original equipment manufacturer (OEM)
- Intended only for designed and specified use
Description
Product Description
The Vulcan Hart 408279-25 3/4 Natural Gas Pressure Regulator is a genuine OEM (original equipment manufacturer) replacement part. Vulcan Hart has years of experience in the commercial foodservice industry and provides high quality kitchen equipment. Use genuine OEM parts for safety, reliability, and performance.
From the Manufacturer
408279-25, 3/4 Natural Gas Pressure Regulator , Vulcan Hart has years of experience in the commercial foodservice industry and provides high quality kitchen equipment
10. Maxitrol Pressure Regulator for Liquid Propane Gas (LP), 3/4" In and 3/4" Out FPT Gas Pipe,1/2 PSIG, 5" – 12" WC, RV48L
Feature
- GAS TYPE & PRESSURE – Gas Type: Propane Gas (LP). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 5″ – 12″ Water Column
- PIPE THREAD SIZE – 3/4″ Inlet & 3/4″ Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture’s table.
- CAUTION – This regulator has 1″ openings for 3/4″ gas pipes. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- MARKING – Model: RV48L, Marking: 1/2 PSIG, Po 5″ – 12″. Inlet pressure 1/2 PSI. Adjustable outlet pressure 5″-12″ Water Column.
- OPERATE TEMPERATURE – 32°F – 225°F (0°C – 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Description
Maxitrol Pressure Regulator for Propane Gas (LP)
Product Description:
- Brand: Maxitrol
- Gas type: Propane Gas (LP)
- Refer to the pictures on how to find the correct pipe thread size. This regulator has 1″ openings for 3/4″ gas pipes. 3/4″ IN and 3/4″ OUT Female Pipe Thread. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar).
- Outlet pressure range: 5” – 12” Water Column
- Ambient operating temperature range: 32°F – 225°F (0°C – 107°C).
Attention:
- NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS.
- CAUTION: Never connect regulator directly to the propane supply source. Maxitrol regulators require an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator.
- Install the regulator properly with gas flowing as indicated by the arrow on the casting.
- *NOTE – Do not install the regulator too close to the heating equipment or use in very cold environment.
How to find the correct pipe thread size
- WARNING: The NPT thread size is NOT referring to the size of the thread itself!
- The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe.
- Measuring the pipe will often mislead you into choosing the wrong pipe size.
- The “pipe thread size” is measured and based on the inside of the pipe.
- A lot of people measured the thread / the opening for the thread / outside diameter of the pipe, and thought that was the thread size. It was WRONG.
Conclusion
By our suggestions above, we hope that you can found Gas Appliance Regulator for you.Please don’t forget to share your experience by comment in this post. Thank you!
