Top 9 Gas Appliance Hook Up Kit

Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters

Perfect for gas logs, garage heaters, gas stoves and wall mounted heaters. Size: 3/8 inch, Compatible With: Heaters, logs, ranges, dryers, etc., Product Type: Connection kits, Fuel Type: Propane/natural gas

Product Description

Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

Product description

M CONNECTOR

From the Manufacturer

Everything you need to hook up your gas range Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.

The 22″ flexible line hose is for 1/2 ” OD connections. Most appliances use 3/8 ” OD. But there are adapters supplied, so you don’t worry to use on your 3/8 ” OD propane or natural gas appliances. It can be used indoor / outdoor.

???? Package Included:

◆ 22″ stainless steel flex gas connector hose

◆ 1/2″ Male Flare x 1/2″ Male Pipe

◆ 1/2″ Male Flare x 3/8″ Male Pipe

◆ 1/2″ Male Flare x 3/8″ Female Pipe

◆ Brass Shutoff Valve with 1/2″ Female Pipe Thread x 1/2″ Male Flare

◆ Special gas seal tape for connections

Perfect for gas logs, garage heaters, gas stoves and wall mounted heaters.

NOT fit for fire pits or fireplace. Please double check your appliance connection.

???? Product Specifications:

Product Type: Connection kits

Fuel Type: Propane/natural gas

Compatible With: Heaters, logs, ranges, dryers, etc.

Product Description

BOLD GRAPHICS and VIBRANT COLOR-CODING MAKE CONSUMER S SELECTION QUICK and EASY KITS ARE IDEAL FOR NEW INSTALLATIONS OR APPLIANCE RELOCATIONS INCLUDES EASY-TO-FOLLOW TRILINGUAL INSTALLATIONINSTRUCTIONS and LEAK CHECK and SEALANT PACKETS KITS CONTAINS ALL PARTS NEEDED FOR AN EASY INSTALLATION CONTENTS: 5_8 O.D. 48 STAINLESS STEEL GAS CONNECTOR and 3 FITTINGS: TWO 1 2 M.I.P. TAPPED 3 8 F.I.P., ONE 3 4 M.I.P. TAPPED 1 2 F.I.P. ANSI Z21.24 CSA 6.10 ANSI Z21.75 CSA 6.27 PRESSURE RATING UP TO 1 2 PSI

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Material Type: Universal Gas Appliance Hook-Up Our premium installation kit provides you with a smarter, better method of supplying natural gas to fireplaces, furnaces, stovetops, cooktops, dryers, and almost all other household gas appliances. Each kit comes with: – (1) 20″ Stainless steel flexible Gas Connector with 1/2″ Female NPT’s – (1) Brass Shut Off valve w/ 1/2″ Female Pipe Thread X 1/2″ Male flare – (1) 1/2″ Male flare X 1/2″ Male pipe – (1) 1/2″ Male flare X 3/8″ Male pipe – (1) 1/2″ Male flare X 3/8″ Female pipe – (1) Special gas seal tape for connections – Easy Connection- Installs most gas appliances – 30 Day Money back Guarantee- Not Satisfied? Customer Satisfaction is our top priority you can return the item with no questions ask for a full refund.

Product Description

This is a genuine replacement part.

From the Manufacturer

Everything you need to hook up your gas dryer. Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.