Finding your suitable readers for gas appliance connector 48″ is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for gas appliance connector 48″ including detail information and customer reviews. Let’s find out which is your favorite one.
853 reviews analysed
1. Dormont 0240892 Gas ApplianceConnectorKit 48 In. Long 5/8 In. Outlet Diameter Yellow Coated
Feature
- COMPLETE GAS RANGE INSTALL KIT: “Safety Shield” coated gas range or furnace installation kit
- LEAK TESTED GAS KIT: 5/8-Inch OD x 48-Inch length coated stainless steel gas connector
- GAS INSTALLATION KIT INCLUDES: two 1/2-Inch MIP (tapped 3/8-Inch FIP) brass adapters and one 3/4-Inch MIP (tapped 1/2-Inch FIP) adapter
- BEST GAS DRYER CONNECTOR KIT: Made in the USA. Everything you need to hook up your gas dryer
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
Description
Product Description
Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals
2. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
3. Flextron FTGC-YC38-48 46" Flexible Epoxy Coated Gas Line Connector with 1/2" Outer Diameter and Nut Fittings, Yellow/Stainless Steel
Description
This is a Flextron gas connector from their Yc38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters. It has an outer diameter of 1/2″ and an inner diameter of 3/8″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. On the ends of this 46″ long connecter are nut fittings. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0.5 psi. Please consult the product information for the flow capacity for this part, for natural gas. The part meets the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 f.
4. Dormont 20-3132-36B 36 in. Long Outlet Diameter Male x 1/2 in. Female Gas Appliance Connector, 1 pack
5. Easyflex Yellow Coated Stainless Steel 1/2" MIP x 1/2" FIP x 18" (1/2" OD) Gas Flex Connector (18" x 1/2")
Feature
- Yellow coated polymer exterior & double corrugated for extra protection and flexibility
- Comes with MIP and FIP flare fittings.
- Compatible with Brasscraft CSSB21 for high rating BTU
- CSA certified and ideal for indoor and outdoor use
- Application includes residential/commercial tank and tankless water heaters, boilers, fryers, stoves
Description
Easyflex gas connectors are CSA certified to ANSI Z21.24 CSA/CGA 6.10 Standard connectors for gas appliance and ANSI Z21.75 CSA/CGA 6.27 Standard Connectors for outdoor gas appliance and manufactured homes. The corrosion resistant yellow coating protects the product from exposure from harsh weather and certain chemicals. See BTU chart for rating.
6. LASCO 10-1211 Flexible Coated Gas Appliance Supply Line, 48-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings
Feature
- Perect for indoor or outdoor projects
- Premium quality gas hose and fantastic value!
- Yellow safety coated connector
- Bright colored line is easy to use
- Corrugated stainless steel
- Made with durable material to withstand time
- Works as both Natural Gas hose or Propane line
- Great for different types of gas powered projects
- Most commonly used as Gas Dryer Hose Connector
Description
Product Description
LASCO 10-1211 Flexible Gas Dryer Connector Line, 3/8-Inch Diameter with 1/2-Inch Fittings, 48-Inch Long. 3/8-Inch 48-Inch Gas Appliance Connector, Flexible Stainless Steel, Safety Coating, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Dryers.
From the Manufacturer
LASCO 10-1211 Flexible Gas Dryer Connector Line, 3/8-Inch Diameter with 1/2-Inch Fittings, 48-Inch Long. 3/8-Inch 48-Inch Gas Appliance Connector, Flexible Stainless Steel, Safety Coating, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Dryers.
7. BrassCraft CSSC22-48 P 3/4-Inch FIP x 3/4-Inch FIP x 48-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 106,000 BTU
Feature
- N/A
- Made in US
- 5/8 In. OD with 15/16-16 Thread x 48 In. stainless steel connector w/corrosion resistant coating
- (2) 3/4 In. FIP steel gas fittings
- 106,000 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Product Description
Brass Craft’s 3/4 In. FIP x 3/4 In. FIP x 48 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 106,000 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft’s 3/4 In. FIP x 3/4 In. FIP x 48 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 106,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
8. BrassCraft CSSC94R-48 X Gas Appliance Connector
Feature
- 1/2 in. Id (5/8 in. Od) x 48 in. Corrugated stainless steel with corrosion resistant coating
- Safety plus excess flow valve helps protect against gas fires and explosions – 5/8 in. Female flare connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% leak tested
- Use with natural, manufactured, mixed and liquefied petroleum (lp or propane) gases and lp gas-air mixtures
- Csa certified. Designed, machined & assembled in the USA
Description
Brass Craft’s 5/8 in. Female flare efv x 1/2 in. Mip x 48 in. Safety plus gas appliance connector is 5/8 in. Od (1/2 in. Id) with a maximum operating capacity of 106,000 btu’s. This safety+plus gas connector combines excess flow technology with the advanced corrosion resistance of procoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the safety+plus valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. Procoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the procoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
9. Cambridge Gas Appliance Connector Yellow Coated 48 Inch Long, 5/8 Inch Outer Diameter with Male Fittings
Feature
- Premium quality yellow coated gas connector 48 inch long 5/8 inch outer diameter, 1/2 inch MIP x 1/2 inch MIP fittings with with shut off valve. Gas BTU rating-106,000 BTU
- Cambridge yellow coated gas connectors are composed of corrosion resistant 304 Stainless Steel and annealed for strength and flexibility, and include an industry-standard yellow coating for added corrosion protection and easy gas line identification. The coating is consistent along the entire length of the connector hose, providing complete coverage and protection from chemical and/or weather-based corrosion.
- This gas connector is constructed for durable, long-lasting usage and performance and is tested to be 100% leak resistant. Ideal for indoor and outdoor use.
- Cambridge coated gas connectors are CSA Listed for use with natural and liquefied petroleum (LP). Connectors are for ease of installation and proper alignment of fixed on piping system appliances using natural or liquefied petroleum (LP) gases at pressures not to exceed 1/2 psi(3.5kPa). Improper use must be avoided.
- Cambridge performance driven and high quality products are preferred by industry leaders in the Electrical, HVAC, Automotive Aftermarket, Plumbing and Home Improvement Markets.
Description
Premium quality yellow coated gas connector 48 inch long 5/8 inch outer diameter, 1/2 inch MIP x 1/2 inch MIP fittings with with shut off valve Gas BTU rating-106,000 BTU. Cambridge yellow coated gas connectors are composed of corrosion resistant 304 Stainless Steel and annealed for strength and flexibility, and include an industry-standard yellow coating for added corrosion protection and easy gas line identification. The coating is consistent along the entire length of the connector hose, providing complete coverage and protection from chemical and/or weather-based corrosion. Cambridge yellow coated gas connectors are composed of corrosion resistant 304 Stainless Steel and annealed for strength and flexibility, and include an industry-standard yellow coating for added corrosion protection and easy gas line identification. The coating is consistent along the entire length of the connector hose, providing complete coverage and protection from chemical and/or weather-based corrosion. This gas connector is constructed for durable, long-lasting usage and performance and is tested to be 100% leak resistant. Ideal for indoor and outdoor use. Cambridge performance driven and high quality products are preferred by industry leaders in the Electrical, HVAC, Automotive Aftermarket, Plumbing and Home Improvement Markets.
10. BrassCraft CSSD45R-48 P Safety PLUS Gas Appliance 1/2" OD Connector with 1/2" MIP EFV x 1/2" FIP x 48"
Feature
- 3/8 in. Id (1/2 in. Od) x 48 in. Corrugated stainless steel with corrosion resistant coating
- Safety+plus excess flow valve helps protect against gas fires and explosions – 1/2 in. Mip connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% leak tested
- Use with natural, manufactured, mixed and liquefied petroleum (lp or propane) gases and lp gas-air mixtures
- Csa certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 1/2 in. Mip efv x 1/2 in. Fip x 48 in. Safety+plus gas appliance connector is 1/2 in. Od (3/8 in. Id) with a maximum operating capacity of 60,500 btu’s. This safety+plus gas connector combines excess flow technology with the advanced corrosion resistance of procoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the safety+plus valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. Procoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the procoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
Conclusion
By our suggestions above, we hope that you can found Gas Appliance Connector 48 for you.Please don’t forget to share your experience by comment in this post. Thank you!