Top 9 Plastic Ice Maker Supply Line

0

Finding your suitable readers for plastic ice maker supply line is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for plastic ice maker supply line including detail information and customer reviews. Let’s find out which is your favorite one.

643 reviews analysed

1. LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing

LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing

Feature

Description

Style:Kit |  Size:Poly Tubing

Product description

Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.

From the Manufacturer

LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.

2. Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length

Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel - 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length

Feature

Description

Size:6 Feet

Product Description

This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

3. Eastman 48316 icemaker connector

Eastman 48316 icemaker connector

Feature

4. Whirlpool 8212547RP 5-Feet Pex Ice Maker Hook-up Kit

Whirlpool 8212547RP 5-Feet Pex Ice Maker Hook-up Kit

Feature

Description

Product Description

This is a genuine replacement part.

From the Manufacturer

Refrigerator water supply kit includes everything needed for easy installation and fits most refrigerators. Refrigerator water supply kit provides water to ice makers, ice and water dispensers, freestanding ice makers, humidifiers, and evaporator coolers. Refrigerator water supply kit contains one 5-Feet pex tubing and fittings.

5. Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft

Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft

Feature

Description

Size:15-Foot

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

6. Eastman 41033 Stainless steel Icemaker Connector 1/4" Comp x 1/4" Comp x 60" length – Stainless Steel – 12 Pack

Eastman 41033 Stainless steel Icemaker Connector 1/4" Comp x 1/4" Comp x 60" length - Stainless Steel - 12 Pack

Feature

Description

Size:5′

Product Description

The Eastman 41033 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 5-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 5′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 5′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

7. Eastman 48398 Copper Ice Maker Installation Kit with Self-Piercing Saddle Valve and 15 ft. Copper Tube

Eastman 48398 Copper Ice Maker Installation Kit with Self-Piercing Saddle Valve and 15 ft. Copper Tube

Feature

Description

Product Description

The Eastman 48398 Ice Maker Installation Kit is the perfect solution for any household. It includes a 15 Feet tube which is made of high-quality copper that provides strength and durability. The 15 ft. roll of copper tubing can be cut to length for a perfect fit.

The kit is universal which fits many major refrigerator brands with ease and provides water to ice-makers, ice and water dispensers. The package includes 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. The Eastman Icemaker Installation Kit includes everything you need to connect a water line to your icemaker.

From the Manufacturer

Eastman’s 15′ Copper Installation Kit includes everything you need for easy installation. The kit fits most refrigerators and provides water to icemakers, ice and water dispensers. Packaging includes a 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. Additional installation hardware is included.

8. FlexCraft 26610-NL, Ice Maker Supply Line, Connects Ice Maker to Water Supply, Ice Maker Hose With 1/4 in Fittings On Both Ends, Braided Stainless Steel 10 Ft

FlexCraft 26610-NL, Ice Maker Supply Line, Connects Ice Maker to Water Supply, Ice Maker Hose With 1/4 in Fittings On Both Ends, Braided Stainless Steel 10 Ft

Feature

Description

Size:10 Ft

This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 120 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.

9. Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet

Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet

Feature

Description

Size:25′

Product Description

The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.

Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Conclusion

By our suggestions above, we hope that you can found Plastic Ice Maker Supply Line for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general