The Best Furnace Appliance Connector Kit

This kit contains 48 IN yellow coated corrosion resistant SS gas connector 1/2 IN MIP-tapped 3/8 IN FIPx3/4 IN MIP-tapped 1/2 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution, This CSA approved gas connector is often used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 5/8 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. SmartSense self resets to standard rate of flow after gas line restoration and pressure equalization. The internal thermal ring expands to stop gas flow in temperatures ranging from 350-425 degrees F.

Perfect for gas logs, garage heaters, gas stoves and wall mounted heaters. Size: 3/8 inch, Compatible With: Heaters, logs, ranges, dryers, etc., Product Type: Connection kits, Fuel Type: Propane/natural gas

PROCURU Gas Connector is tested and certified by CSA for indoor and outdoor use. Approved for LP or Propane including Natural Gas used in common appliances. 100% leak tested for safe and reliable performance. SafeGuard Coating adds patented layer of protection on Corrugated Stainless Steel Tubing against corrosion and common household cleaning agents.

Product description

M CONNECTOR

From the Manufacturer

Everything you need to hook up your gas range Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.

CAMBRIDGE Performance driven and high quality products are preferred by industry leaders in the Electrical, HVAC, Automotive Aftermarket, Plumbing and Home Improvement Markets. Be sure to view all of our Amazon ASINs for a product solution that works best for you.

Premium quality yellow coated gas connector 36 inch long 5/8 inch outer diameter, 1/2 inch MIP x 3/4 inch FIP fittings with with shut off valve. Gas BTU rating-125,000 BTU. Cambridge yellow coated gas connectors are composed of corrosion resistant 304 Stainless Steel and annealed for strength and flexibility, and include an industry-standard yellow coating for added corrosion protection and easy gas line identification. The coating is consistent along the entire length of the connector hose, providing complete coverage and protection from chemical and/or weather-based corrosion. This gas connector also includes a valve which is constructed for durable, long-lasting usage and performance and is tested to be 100% leak resistant. Ideal for indoor and outdoor use. Cambridge coated gas connectors are CSA Listed for use with natural and liquefied petroleum (LP). Connectors are for ease of installation and proper alignment of fixed on piping system appliances using natural or liquefied petroleum (LP) gases at pressures not to exceed 1/2 psi(3.5kPa). Improper use must be avoided. Cambridge performance driven and high quality products are preferred by industry leaders in the Electrical, HVAC, Automotive Aftermarket, Plumbing and Home Improvement Markets.

This kit contains 36 IN yellow coated corrosion resistant SS gas connector 1/2 IN MIP-tapped 3/8 IN FIPx3/4 IN MIP-tapped 1/2 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution. This CSA approved gas connector is often used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 5/8 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. SmartSense self resets to standard rate of flow after gas line restoration and pressure equalization. The internal thermal ring expands to stop gas flow in temperatures ranging from 350-425 degrees F.

This kit contains 60 IN yellow coated corrosion resistant SS gas connector 1/2 IN MIP-tapped 3/8 IN FIPx3/4 IN MIP-tapped 1/2 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution. This CSA approved gas connector is often used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 5/8 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire and self resets to standard rate of flow after gas line restoration and pressure equalization. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. The internal thermal ring expands to stop gas flow in temperatures ranging from 350-425 degrees F.

This kit contains 24 IN yellow coated corrosion resistant SS gas connector 1/2 IN MIP-tapped 3/8 IN FIPx3/4 IN MIP-tapped 1/2 IN FIPx1/2 IN MIP SmartSense EFV & TS adapters, thread sealant, leak solution. This CSA approved gas connector is often used on home appliances like gas dryers. SmartSense used with Dormont coated gas connectors gives an industry leading 3 Levels of Protection. This 5/8 IN OD flarex1/2 IN MIP SmartSense excess flow valve and thermal shut off is an intricately-designed valve with two primary components, gas flow-limiting plunger and thermal shutoff sensing ring. SmartSense detects and activates in the event of gas line rupture, disconnection, or fire. The plunger limits gas flow protecting against excessive gas leaks in the event of full-line rupture or disconnect. SmartSense self resets to standard rate of flow after gas line restoration and pressure equalization. The internal thermal ring expands to stop gas flow in temperatures ranging from 350-425 degrees F.