The Best Refrigerator Water Valve Recessed

This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

This Eastman 60237 Sweat Round Mini Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection

This outlet box comes complete with a 1/4-Turn Ball valve installed, pre-loaded reversible nails which provide a strong rigid mount, and a faceplate cover. It does not need a support bracket, and the outlet box can be installed to the left or right stud bay. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. You will never have to spend money on small, ineffective and expensive refrigerator filters ever again.

This icemaker kit includes everything you will need to quickly and easily connect your refrigerator and reverse osmosis system. It includes one JG quick-connect “Tee” fitting, one JG quick-connect shut off ball valve and 20 feet of JG ¼” food-grade poly tubing. The “Tee” fitting diverts the RO purified water between the fridge and RO faucet giving access to both outlets. The ball valve can be used to shut off water flow to the fridge.

Kit includes
(1) * JG ¼” Tee quick-connect fittings
(1) * JG ¼” Shut off valve
(1) * JG ¼” Tubing (20 ft)

Works for all APEC ROES-50, ROES-PH75, ROES-UV75, RO-45, RO-90, RO-PERM and RO-PUMP systems, and most standard under-counter reverse osmosis systems using ¼” tubing and connectors.

For over 20 years, APEC has been an industry leading manufacturer of high performance RO systems.

APEC Water does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water products from Amazon or APEC Water directly for authenticity.

Product Description

2 support brackets . Provides quick, safe water supply and shut off for refrigerator ice maker and water dispenser . High impact polystyrene .

From the Manufacturer

Oatey products can be found in residential and commercial applications and have achieved excellent brand name recognition with consumers. All products are backed with the highest quality technical and customer support programs in the industry

This Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.

The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.