The Best Refrigerator Ice Maker Pex

Product Description

This is a genuine replacement part.

From the Manufacturer

Refrigerator water supply kit includes everything needed for easy installation and fits most refrigerators. Refrigerator water supply kit provides water to ice makers, ice and water dispensers, freestanding ice makers, humidifiers, and evaporator coolers. Refrigerator water supply kit contains one 5-Feet pex tubing and fittings.

This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

This Eastman 60242 Crimp PEX Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. You will never have to spend money on small, ineffective and expensive refrigerator filters ever again.

This icemaker kit includes everything you will need to quickly and easily connect your refrigerator and reverse osmosis system. It includes one JG quick-connect “Tee” fitting, one JG quick-connect shut off ball valve and 20 feet of JG ¼” food-grade poly tubing. The “Tee” fitting diverts the RO purified water between the fridge and RO faucet giving access to both outlets. The ball valve can be used to shut off water flow to the fridge.

Kit includes
(1) * JG ¼” Tee quick-connect fittings
(1) * JG ¼” Shut off valve
(1) * JG ¼” Tubing (20 ft)

Works for all APEC ROES-50, ROES-PH75, ROES-UV75, RO-45, RO-90, RO-PERM and RO-PUMP systems, and most standard under-counter reverse osmosis systems using ¼” tubing and connectors.

For over 20 years, APEC has been an industry leading manufacturer of high performance RO systems.

APEC Water does not distribute or sell our products to any 3rd party sellers on Amazon. Please purchase genuine APEC Water products from Amazon or APEC Water directly for authenticity.

This is a universal 1/4 15 foot pex supply line. Can be used on any model with 1/4 connections. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.

From the Manufacturer

LDR 509 5175 Pex Ice Maker Connector, 1/4-Inch COMP X 1/4-Inch COMP, 25-Foot, PEX. 1/4-Inch COMP X 1/4-Inch COMP X 25-Foot PEX Ice Maker Installation Kit constructed of cross linked, high density polyethylene

25-foot PEX line with built-in flare connections. 1/4 inch nut connections. Make sure to not overtighten. Perfect water line for coiling behind a refrigerator, freezer, and/or tight space. This is the preferred water line to use over copper. Copper tends to oxidize over time and also is not friendly in kinks and/or tight spacing. With built-in flares, it is easy to install and quick to change out. This is not a GE OEM product. The GE brand names and logos are the registered trademarks of their respective owners. Any use of the GE brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”