The Best Gas Appliance Connection

Perfect for gas logs, garage heaters, gas stoves and wall mounted heaters. Size: 3/8 inch, Compatible With: Heaters, logs, ranges, dryers, etc., Product Type: Connection kits, Fuel Type: Propane/natural gas

Product Description

Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.

Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters

BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Premium quality yellow coated gas connector 36 inch long 5/8 inch outer diameter, 1/2 inch MIP x 3/4 inch FIP fittings with with shut off valve. Gas BTU rating-125,000 BTU. Cambridge yellow coated gas connectors are composed of corrosion resistant 304 Stainless Steel and annealed for strength and flexibility, and include an industry-standard yellow coating for added corrosion protection and easy gas line identification. The coating is consistent along the entire length of the connector hose, providing complete coverage and protection from chemical and/or weather-based corrosion. This gas connector also includes a valve which is constructed for durable, long-lasting usage and performance and is tested to be 100% leak resistant. Ideal for indoor and outdoor use. Cambridge coated gas connectors are CSA Listed for use with natural and liquefied petroleum (LP). Connectors are for ease of installation and proper alignment of fixed on piping system appliances using natural or liquefied petroleum (LP) gases at pressures not to exceed 1/2 psi(3.5kPa). Improper use must be avoided. Cambridge performance driven and high quality products are preferred by industry leaders in the Electrical, HVAC, Automotive Aftermarket, Plumbing and Home Improvement Markets.

Product description

M CONNECTOR

From the Manufacturer

Everything you need to hook up your gas range Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.