Nowadays, there are so many products of refrigerator refrigerant in the market and you are wondering to choose a best one.You have searched for refrigerator refrigerant in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings refrigerator refrigerant which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
937 reviews analysed
1. BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port
Feature
- BPV31 Piercing Valve for Bullet with R134a refrigerant recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit).
- R134a refrigerant charge hose with gauge: 19″ hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4″ end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port.
- BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet
- 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4″, 5/16″ and 3/8″. The valve is not created or sold by Bullet.
- The hose is made of corrosion-resistant brass, won’t wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. But valve of other sellers with no gasket, it will leaks and can not fix for a fridge, not freezing properly.Our replacement hose kit has been well-tested by the manufacturer.
- Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a.
2. 3 Pieces Set A/C R134A Refrigerant Charging Hose R134A Charging Hose Quick Couple, 1/2 in Male 1/4 in SAE Female Can Tap Valve, BPV31 Bullet Piercing Tap Valve Compatible with GPV14 GPV31 GPV38 GPV56
Feature
- Package information: 3 pieces set in total, come with 1 piece R134A charging hose with gauge and 2 pieces BPV31 bullet piercing tap valve kit, each kit includes 1 piece piercing valve, 1 piece hex key and 2 pieces adapters
- R134A refrigerant charging hose: the length of charging hose is approx. 59 inch/ 149.8 cm, charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings,the R134a can tap is only suitable for R134A refrigerant of vehicle or home air-conditioning
- BPV31 bullet piercing tap valve: it can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- About material: the bullet piercing tap valve is made of corrosion-resistant metal mainly, not easily worn out or rust, the refrigerant charging hose is made of rubber material mainly, it is resistant to high pressure
- Easy to install: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant
Description
Features:
R134A refrigerant charging hose:
The charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings, suitable for R134A refrigerant of vehicle or home air-conditioning. 2019-10-11：
Features:
R134A refrigerant charging hose:
The charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings, the R134a can tap is only suitable for R134A refrigerant of
vehicle or home air-conditioning.
BPV31 bullet piercing tap valve:
It can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Specifications:
Charging hose:
Size: approx. 59 inch/ 149.8 cm in length
Maximum pressure value: 200 PSI
Bullet piercing tap valve:
Material: metal
Color: silver
Package includes:
1 x R134A refrigerant charging hose
2 x BPV31 bullet piercing tap valve kit
Warm notice:
It is not suitable for refrigerant 410a.
Put on your safety glasses and protective gloves before piercing the pipe.
This is not original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility, not work as brands.
3. Rectorseal 45302 AC Leak Freeze R, 0.5 Oz, Red
Feature
- AC leak freeze permanently seals leaks in air conditioning and refrigeration systems
- Will continue to seal additional leaks for up to 1 year that meet testing specifications
- Does not contain polymers
- Tested to be non-clogging to a/C compressor and recovery unit
- Ideal for preventive maintenance and leak protection
- This is an aftermarket of generic part
Description
Ac leak freeze is the ideal product for air conditioner unit repair and refrigeration repair. Ac leak freeze will stop leaks of refrigerant gas in HVAC air conditioning and refrigeration systems in homes and commercial buildings. Ac leak freeze ensures that the AC repair or refrigeration repair permanently seals leaks. Ac leak freeze is suspended until it mixes with the refrigerant. Ac leak freeze is activated by refrigerant escaping at the site of a leak – forming a chemical weld and sealing the leak.
4. Enviro-Safe 3226 Can Tap with Gauge – R-134a can to R-12/R-22 port
Description
This unique can tap has an R-134a screw on can connection and a R12/R22 service port connection. It was made for EnviroSafe cans which have an R-134a thread and allows you to install directly to R12 and R22 systems. Centrally installed is an easy to read pressure gauge. 20″ long hose 1/4″ end end fits R12, 22, 502 fittings Gauge has scale readings for R134, R12, & 22 Use for household with aerosol style cans. This gauge does not have a shut-off. The T-handle is a piercing device only.
5. 2 Packs A/C Retrofit Valve with Dust Cap Converts R12 to R134a Fit 7/16 Inch Low Side Port BPV-31 Bullet Piercing Tap Valve Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
Feature
- Package includes: you will receive 1 pack BPV-31 bullet piercing tap valve kit (including 1 piercing valve, 1 hex key, 2 adapters) and 1 pack universal retrofit valve with a dust cap, a practical kit and convenient for you to use
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
- compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port
- Suit for vehicles pre-1994, comes with R-134a refill fittings
- Easy to use: BPV-31 bullet piercing tap valve: just screw it on then it’s okay
- BPV-31 bullet piercing tap valve: you only need 1 hex key wrench (included) to install this part
- Its compact design only requires a 2-inch clearance area for installation and use
- Durable material: both of the kit are made of corrosion-resistant metal that won’ t wear out or rust over time, and anti-leaking design that will be safer for you
Description
Features:
Universal retrofit valve:
Application: suitable for 7/16 inch low side port.Fits all vehicles pre-1994.Compatible with R-134a refill fittings.
Function: converts from R-12 to R-134A air conditioning system. This Valve can be screwed on top of a closed AC system that just needs a little refrigerant or top off.
BPV-31 bullet piercing tap valve:
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Easy to install:
Cleaning off the copper pipe with a wire brush or abrasive cloth. Then attach it to the smoothest part of the copper tube to ensure tight sealing.
Specifications:
Quantity: 2 packs
Color: as pictures shown
Material: metal
Package includes:
1 Pack universal retrofit valve (with a dust cap)
1 Pack BPV-31 bullet piercing tap valve
Warm note:
It is not suitable for refrigerant 410a.
Put on your safety glasses and protective gloves before piercing the pipe.
The mention of any brands and any related model designation above is only for purposes of demonstrating compatibility, not for trademark using.
6. Supco BPV31 Bullet Piercing Valve
Description
Product Description
The only valve with a permanent type, patented gasket application Creates a permanent, leak-proof seal that will withstand any pressure and temperature for the life of the unit Furnished with adapter sleeves for multiple use application Hex key included No tools required 1/4″ male flare outlet.
From the Manufacturer
This is a genuine replacement part. The model number and name for the following item is: Supco BPV31 Bullet Piercing Valve
7. BPV31 Piercing Valve for Bullet with R134a Charging Hose, Refrigerant Can Tap with Gauge R134a can to R-12/R-22 port
Feature
- PACKAGE INCLUDE: R134a charging hose (with Gauge ) + BPV31 Piercing Valve for Bullet.
- R134a Charging Kit: 19″ hose with R-134a Can to R-12/R-22 service port connection,1/4″ end fits R12, 22, 502 fittings.And the gauge has scale readings for R134, R12, & 22.
- BPV31 Piercing Valve for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet
- 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4″, 5/16″ and 3/8″.
- PREMIUM QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer.
- MONEY-BACK GUARANTEE:For any reason you’re not satisfied, please contact us and we’ll provide you a new replacement or full refund.
8. OrionMotorTech R134A Can Tap Valve Refrigerant Dispenser Tool with Tank Adapter for 1/4 and 1/2 inch AC Freon Charging Hose
Feature
- ???? WIDE COMPATIBILITY —- Come with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4″ and 1/2″ female fittings ac charging hose.
- ???? R134A CAN TAP —- R-134a brass automotive air conditioning dispensing valve, connects all R-134a cans with 1/4″ acme threads to all auto R-134a service hoses
- ???? R134A TANK ADAPTER —- Include extra R134A refrigerant tank adapter, 1/4″ acme female x 1/2″ male flare, connects 1/4″ male can tap to 1/2″ female hose
- ???? HEAVY-DUTY AND DURABILITY —- Made of heavy duty brass to last under extreme conditions, features thickening seals to prevent leaking
- ???? LIFT-TIME WARRANTY —– Orion Motor Tech pursue outstanding quality and service, only have point of departure, there is no terminal point. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result. 1.Go to your amazon account and find the order. 2.Click the seller name and enter the store page. 3.Click “Ask a question”
9. 2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
Feature
- Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use
- The hose adopts quality rubber material, good pressure resistance and reliable
- R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion
- It fits only those cans with the thread of 1/2 inch
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total
- Easy to use: you only need a hex key wrench (included) to install this part
- Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant
Description
You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge
BPV-31 bullet piercing tap valve:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Material: metal
Quantity: 2 packs
Color: sliver
R12 R22 charging hose with gauge：
R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.
Material: copper and rubber
Quantity: 1 piece
Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge
Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
Conclusion
By our suggestions above, we hope that you can found Refrigerator Refrigerant for you.Please don’t forget to share your experience by comment in this post. Thank you!
