Nowadays, there are so many products of ice maker supply box cpvc in the market and you are wondering to choose a best one.You have searched for ice maker supply box cpvc in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ice maker supply box cpvc which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
790 reviews analysed
1. Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
Feature
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
Description
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
2. Eastman 60234 Pre-assembled Ice Maker Outlet Box, 1/2-Inch CPVC with Installed 1/4-Turn Ball Valve, White
Feature
- CONNECTION: 1/2 inch CPVC connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
Description
This Eastman 60234 Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
3. Eastman 60239 CPVC Round Mini Ice Maker Outlet Box, 1/2-inch CPVC Connection with Installed 1/4-Turn Ball Valve, White
Feature
- CONNECTION: 1/2 inch CPVC inlet connection and 1/4-inch OD compression outlet
- Trim Ring accommodates up to 1″ sheet rock.
- DURABLE: Preloaded nails provide strong rigid mount
- INSTALLATION: This installation kit does not need a support bracket
- nails are reversible, and the box can be mounted to left or right stud bay.
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-Turn brass valve, pre-loaded nails, and a faceplate cover
- USAGE: It is designed for recessed residential applications
Description
This Eastman 60239 CPVC Round Mini Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection
This outlet box comes complete with a 1/4-Turn Ball valve installed, pre-loaded reversible nails which provide a strong rigid mount, and a faceplate cover. It does not need a support bracket, and the outlet box can be installed to the left or right stud bay. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
4. Oatey 39130 1/2" FIP ICE Maker Box
Description
Product Description
12K ice maker box with nails preloaded. Right or left hand installation. Provides quick, safe water supply and shutoff for refrigerator ice maker and water dispenser. Valves comply with requirements of NSF 61, Section 9. No support needed. Box dimensions: 3.20″ W. x 4.15″ H. x 2.35″ D. Faceplate dimensions: 5.00″ W. x 5.89″ H. x .50″ D. U.S. patent No. D428.117. Canadian patent No. 90133. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
From the Manufacturer
Oatey products can be found in residential and commercial applications and have achieved excellent brand name recognition with consumers. All products are backed with the highest quality technical and customer support programs in the industry
5. Eastman 60240 Pre-assembled Ice Maker Outlet Box, 1/2-Inch CPVC with Installed 1/4-Turn Ball Valve and Hammer Arrester, White
Feature
- CONNECTION: 1/2 inch CPVC connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
Description
This Eastman 60240 CPVC Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
6. Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box, 1/2-Inch Connection with 1/4-Turn Ball Valve, White
Feature
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- Trim Ring accommodates up to 1″ sheet rock
- DURABLE: Preloaded nails provide strong rigid mount
- INSTALLATION: This installation kit does not need a support bracket
- nails are reversible, and the box can be mounted to left or right stud bay.
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-Turn brass valve, pre-loaded nails, and a faceplate cover
- USAGE: It is designed for recessed residential applications
Description
This Eastman 60238 Crimp PEX Round Mini Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection
This outlet box comes complete with a 1/4-Turn Ball valve installed, pre-loaded reversible nails which provide a strong rigid mount, and a faceplate cover. It does not need a support bracket, and the outlet box can be installed to the left or right stud bay. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
7. Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White
Feature
- CONNECTION: 1/2 inch Sweat inlet connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
Description
This Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
8. Eastman 60241 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve and Hammer Arrester, White
Feature
- CONNECTION: 1/2 inch Sweat inlet connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
Description
This Eastman 60241 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, installed hammer arrester, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
9. Eastman 60249 CPVC Center Drain Washing Machine Outlet Box Assembly Kit, 1/2-Inch CPVC, 3/4-Inch MHT outlet with 1/4-Turn Ball Valves Installed, White
Feature
- CONNECTION: 1/2″ CPVC connection and 3/4-inch Male Hose Thread (MHT) outlet
- SPECS: 1/2-inch CPVC inlet connection and 3/4-inch Male Hose Thread (MHT) outlet
- Inner Dimension: 7-1/2″ x 5-5/8″ x 3-3/2″
- QUALITY: This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks
- USAGE: It is designed for recessed residential applications
- CERTIFICATION: This outlet box is UPC certified for use
Description
This Eastman 60249 CPVC Center Drain Washing Machine Outlet Box Assembly Kit is designed for recessed residential applications. It has a 1/2-inch CPVC inlet connection, a 3/4-inch male hose thread (MHT) outlet, and a center drain connection.
The outlet box comes complete with a pre-installed 1/4-Turn brass hot and cold valve, support bracket, and a Snap-On faceplate cover which accommodates up to 1-inch drywall. It is built with one-piece construction and a raised drip guard that prevents potential leaks.
10. Oatey 38529 Quadtro Washing Machine Outlet Box Copper Sweat Tail Piece, 1/4" Turn, 2" Hub
Feature
- Flexibility – Allows for right, left, or center drain and bottom or top mount valves. 2″ drain opening fits PVC or ABS Sch. 40 DWV pipe. Box Dimensions: 8-3/4″W x 7-1/2″H x 3-5/8″D. Faceplate Dimensions: 11-3/4″W x 10-1/8″H.
- Easy installation – “Lock & Load” valve mounting system for quick and easy positioning. Easy to remove knockout, Patent Pending Hammer Valves. Snap-on Faceplate Frame accommodates up to 1″ drywall.
- Durability – Box and support brackets made from high-impact polystyrene
- Includes – 4 support brackets included for mounting
Conclusion
By our suggestions above, we hope that you can found Ice Maker Supply Box Cpvc for you.Please don’t forget to share your experience by comment in this post. Thank you!