Finding your suitable readers for gas appliance supply line is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for gas appliance supply line including detail information and customer reviews. Let’s find out which is your favorite one.
736 reviews analysed
1. LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings
Description
Product Description
LASCO 10-1215 LASCO 10-1215 Flexible Coated Gas Appliance Supply Line, 72-Inch, 3/8-Inch OD Connector with 1/2-Inch MIP X 1/2-Inch FIP Fittings. For indoor or outdoor use. Yellow safty coating – corrugated stainless steel. For use with natural gas or propane. Connect to gas dryers! Larsen Supply a third generation family owned and operated company with over 80 years of experience has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk SKU’s. We pride ourselves on service, selection and support! All Lasco merchandise if warranted to be free of manufacturing defects. Please revert to retail place of purchase for resolution of any possible plumbing questions, warranty or defective part replacement.
From the Manufacturer
LASCO 10-1215 Flexible Gas Dryer Connector Line, 3/8-Inch Diameter with 1/2-Inch Fittings, 72-Inch Long. 3/8-Inch X 72-Inch Gas Appliance Connector, Flexible Stainless Steel, Safety Coating, 1/2-Inch Pipe Thread Ends. Indoor or outdoor use. Yellow Safety Coated. Corrugated Stainless Steel. For Use With Natural Gas or Propane. To Connect Gas Dryers.
2. Dormont 0240892 Gas ApplianceConnectorKit 48 In. Long 5/8 In. Outlet Diameter Yellow Coated
Feature
- COMPLETE GAS RANGE INSTALL KIT: “Safety Shield” coated gas range or furnace installation kit
- LEAK TESTED GAS KIT: 5/8-Inch OD x 48-Inch length coated stainless steel gas connector
- GAS INSTALLATION KIT INCLUDES: two 1/2-Inch MIP (tapped 3/8-Inch FIP) brass adapters and one 3/4-Inch MIP (tapped 1/2-Inch FIP) adapter
- BEST GAS DRYER CONNECTOR KIT: Made in the USA. Everything you need to hook up your gas dryer
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
Description
Product Description
Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals
3. 72" Flexible Stainless Steel Gas Appliance Line with 1/2" OD 1/2 MIP x 1/2 FIP
Feature
- This is for gas dryers and not for ovens or ranges
- 72″ Flexible Stainless Steel Gas Appliance Line
- 203-3132-72 – 6 Feet Long
- This item is not universal. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
- Inner dimensions of this line are 3/8″. Make to measure before ordering or will not fit.
Description
72″ Flexible Stainless Steel Gas Appliance Line With 1/2″ OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2″ OD (3/8″ ID) 1/2 MIP x 1/2 FIP – Yellow Coated.
4. LASCO 10-1259 Flexible Coated Stainless Steel Gas Range Supply Line, 72-Inch, 5/8 Inch ID with 3/4 Inch Pipe Thread Fittings
Feature
- Perect for indoor or outdoor projects
- Premium quality gas hose and fantastic value!
- Yellow safety coated connector
- Bright colored line is easy to use
- Corrugated stainless steel
- Made with durable material to withstand time
- Works as both Natural Gas hose or Propane line
- Great for different types of gas powered projects
- Most commonly used as Gas Range Connector
5. Mr. Heater One-Stop Universal Gas-Appliance Hook-Up Kit
Feature
- Nullify
- Imported
- 5-piece universal gas-appliance hook-up kit
- Comes with everything needed for installing most gas appliances
- Includes 18-inch flexible gas line, 3 different couplings and on/off valve
- On/off valve provides easy servicing of appliances or summer shutdown
- Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters
Description
Perfect for gas logs, garage heaters, gas stoves and wall mounted heaters. Size: 3/8 inch, Compatible With: Heaters, logs, ranges, dryers, etc., Product Type: Connection kits, Fuel Type: Propane/natural gas
6. BrassCraft CSSC54-72 P 1/2-Inch FIP x 1/2-Inch MIP x 72-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 86,000 BTU
Feature
- 5/8 In. OD with 15/16-16 Thread x 72 In. stainless steel connector w/corrosion resistant coating
- 1/2 In. FIP and 1/2 In. MIP steel gas fittings
- 86,000 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Description
Product Description
Brass Craft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
7. Stanbroil One Stop Gas Appliance Hook Up Kit – Brass Gas Ball Valve and Flexible Gas Connector w/Fittings
Feature
- Highly durable, easy to install and use for most gas appliances
- 1/2″ OD x 3/8″ ID, 22″ stainless steel flexible gas connector with 1/2″ Female Flare on both end
- Brass Shut-off valve 1/2 female NPT x 1/2 Male Flare
- 3 different couplings,1/2″ male Flare x 1/2″ NPT, 1/2″ male flare x 3/8″ male NPT, 1/2″ male flare x 3/8″ female NPT
- CSA certified
Description
Along with everything needed for installing most gas appliances
On/off valve provides easy servicing of appliances or summer shutdown
5 Pieces kit includes: 22″ stainless flexible gas connector
1/2″female flare at both ends
1/2″ male Flare x 1/2″ NPT
1/2″ male flare x 3/8″ male NPT
1/2″ male flare x 3/8″ female NPT
Brass shut-off valve with 1/2″ female NPT x 1/2″ male flare
Fit for gas logs, garage heaters, gas stoves and wall mounted heaters
8. BrassCraft CSSD114R-72 X Gas Appliance Connector
Feature
- 3/8 In. ID (1/2 In. OD) x 72 In. corrugated stainless steel with corrosion resistant coating
- Safety+PLUS Excess Flow Valve helps protect against gas fires and explosions – 3/8 In. Female Flare or 1/2 In. MIP connection to gas supply or gas ball valve
- Approved for indoor and outdoor use. 100% Leak Tested
- Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures
- CSA certified. Designed, machined & assembled in the USA
Description
BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
9. Whirlpool 30-48KITRC Gas Range Connector Kit
Description
Product description
M CONNECTOR
From the Manufacturer
Everything you need to hook up your gas range Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.
10. PROCURU 5/8" OD x 72" Gas Flex Line Connector Kit for Stove Range, Furnace WeatherProof Stainless Steel with SafeGuard Coating
Feature
- 5/8″ Outer Diameter x 72″ Length (6 Ft.) Stainless steel gas connector with SafeGuard coating for anti-corrosion and air-tight protection
- (3) Brass fittings included: 1/2″ MIP (tapped 3/8″ FIP) (2 pcs), and 3/4″ MIP (tapped 1/2″ FIP) (1 pc)
- 4-Mil High-density gas PTFE sealant tape 1/2″ x 520″, Installation instructions included
- Designed for stoves, range, furnace, and other natural gas and propane appliances
- 100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, propane, LP, and LP-gas air mixtures
Description
PROCURU Gas Connector is tested and certified by CSA for indoor and outdoor use. Approved for LP or Propane including Natural Gas used in common appliances. 100% leak tested for safe and reliable performance. SafeGuard Coating adds patented layer of protection on Corrugated Stainless Steel Tubing against corrosion and common household cleaning agents.
Conclusion
By our suggestions above, we hope that you can found Gas Appliance Supply Line for you.Please don’t forget to share your experience by comment in this post. Thank you!
