Finding your suitable readers for refrigerator recharge kit r134 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for refrigerator recharge kit r134 including detail information and customer reviews. Let’s find out which is your favorite one.
605 reviews analysed
1. 2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
Feature
- Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use
- The hose adopts quality rubber material, good pressure resistance and reliable
- R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion
- It fits only those cans with the thread of 1/2 inch
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total
- Easy to use: you only need a hex key wrench (included) to install this part
- Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant
Description
You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge
BPV-31 bullet piercing tap valve:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Material: metal
Quantity: 2 packs
Color: sliver
R12 R22 charging hose with gauge:
R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.
Material: copper and rubber
Quantity: 1 piece
Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge
Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
2. 2 Packs A/C Retrofit Valve with Dust Cap Converts R12 to R134a Fit 7/16 Inch Low Side Port BPV-31 Bullet Piercing Tap Valve Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
Feature
- Package includes: you will receive 1 pack BPV-31 bullet piercing tap valve kit (including 1 piercing valve, 1 hex key, 2 adapters) and 1 pack universal retrofit valve with a dust cap, a practical kit and convenient for you to use
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31
- compatible with: compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port
- Suit for vehicles pre-1994, comes with R-134a refill fittings
- Easy to use: BPV-31 bullet piercing tap valve: just screw it on then it’s okay
- BPV-31 bullet piercing tap valve: you only need 1 hex key wrench (included) to install this part
- Its compact design only requires a 2-inch clearance area for installation and use
- Durable material: both of the kit are made of corrosion-resistant metal that won’ t wear out or rust over time, and anti-leaking design that will be safer for you
Description
Features:
Universal retrofit valve:
Application: suitable for 7/16 inch low side port.Fits all vehicles pre-1994.Compatible with R-134a refill fittings.
Function: converts from R-12 to R-134A air conditioning system. This Valve can be screwed on top of a closed AC system that just needs a little refrigerant or top off.
BPV-31 bullet piercing tap valve:
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Easy to install:
Cleaning off the copper pipe with a wire brush or abrasive cloth. Then attach it to the smoothest part of the copper tube to ensure tight sealing.
Specifications:
Quantity: 2 packs
Color: as pictures shown
Material: metal
Package includes:
1 Pack universal retrofit valve (with a dust cap)
1 Pack BPV-31 bullet piercing tap valve
Warm note:
It is not suitable for refrigerant 410a.
Put on your safety glasses and protective gloves before piercing the pipe.
The mention of any brands and any related model designation above is only for purposes of demonstrating compatibility, not for trademark using.
3. EZ Chill EZC110-4 Car Air Conditioner Hose and Gauge for R134A Refrigerant, Recharge Kit for Cars & Trucks & More, Reusable
Description
EZ Chill Reusable R-134a Gauge and Hose features an in-line gauge, easy-to-use thumb lever dispenser, and ninety degree coupler. The gauge is able to diagnose if a recharge is needed, identify the current low-side pressure in the system, and determine increases in pressure during the recharge process. This product is compatible with both sealed and self-sealing R-134a cans.
4. BACOENG R134A R12 R22 Economy Refrigerant U-Charge Hose Kit Recharge Hose with Gauge, R-134a Can to R-12/R-22 Port
Feature
- This kit doesn’t include R134a quick couplers for AUTO AC refrigerant recharging. If you need it, please purchase separately or order our AUTO service kit.
- This unique can tap has an R-134a screw on can connection and a R12/R22 service port connection.
- Comes with an easy to read pressure gauge .Gauge has scale readings for R134, R12, & R22 Use for household with aerosol style cans.
- NOTE: NO QUICK COUPLER FOR AUTO AC RECHARGING! Includes: Hose, Pressure Gauge, Refrigerant Can Tap, Hose Fitting
- Total length: 50cm/20inch, Refrigerant Can Tap: 1/2″ acme fitting, Hose Fitting: 1/4″ SAE, Pressure Gauge Scale: 0 – 350 PSI, Temperature Reading: ℉
Description
This unique can tap has an R-134a screw on can connection and a R12/R22 service port connection. It comes from an R-134a thread and allows you to install directly to R12 and R22 systems. Centrally installed is an easy to read pressure gauge. 20″ long hose 1/4″ end end fits R12, 22, 502 fittings Gauge has scale readings for R134, R12, & 22 Use for household with aerosol style cans. This gauge does not have a shut-off. The T-handle is a piercing device only.
Specifications:
- Material: Metal and plastic
- Color: Blue as shown in the picture
- Total length: 50cm/20inch
- Refrigerant Can Tap: 1/2″ acme fitting (R-134a Style )
- Pressure Gauge Scale: 0 – 350 PSI for R134, R12, & R22
- Temperature Reading: ℉
- Package Included:1 × R134a, R22, R12 U-charge Hose with Gauge
Note:
- Please allow slim measuring error due to manual measurement, make sure you do not mind before you bid.
- Push the needle a little forward to pierce the freon bottle and then tighten the unit to the can when the needle is in the right place.
- The 1/2 thread is specially designed for American and Europe, which has a maximum diameter of 12mm.
- This kit doesn’t include R134a quick couplers for AUTO AC refrigerant recharging. If you need it, please purchase additionally or order our AUTO service kit.
5. Enviro-Safe 3226 Can Tap with Gauge – R-134a can to R-12/R-22 port
Description
This unique can tap has an R-134a screw on can connection and a R12/R22 service port connection. It was made for EnviroSafe cans which have an R-134a thread and allows you to install directly to R12 and R22 systems. Centrally installed is an easy to read pressure gauge. 20″ long hose 1/4″ end end fits R12, 22, 502 fittings Gauge has scale readings for R134, R12, & 22 Use for household with aerosol style cans. This gauge does not have a shut-off. The T-handle is a piercing device only.
6. 3 Pieces Set A/C R134A Refrigerant Charging Hose R134A Charging Hose Quick Couple, 1/2 in Male 1/4 in SAE Female Can Tap Valve, BPV31 Bullet Piercing Tap Valve Compatible with GPV14 GPV31 GPV38 GPV56
Feature
- Package information: 3 pieces set in total, come with 1 piece R134A charging hose with gauge and 2 pieces BPV31 bullet piercing tap valve kit, each kit includes 1 piece piercing valve, 1 piece hex key and 2 pieces adapters
- R134A refrigerant charging hose: the length of charging hose is approx. 59 inch/ 149.8 cm, charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings,the R134a can tap is only suitable for R134A refrigerant of vehicle or home air-conditioning
- BPV31 bullet piercing tap valve: it can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- About material: the bullet piercing tap valve is made of corrosion-resistant metal mainly, not easily worn out or rust, the refrigerant charging hose is made of rubber material mainly, it is resistant to high pressure
- Easy to install: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant
Description
Features:
R134A refrigerant charging hose:
The charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings, suitable for R134A refrigerant of vehicle or home air-conditioning. 2019-10-11:
Features:
R134A refrigerant charging hose:
The charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings, the R134a can tap is only suitable for R134A refrigerant of
vehicle or home air-conditioning.
BPV31 bullet piercing tap valve:
It can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Specifications:
Charging hose:
Size: approx. 59 inch/ 149.8 cm in length
Maximum pressure value: 200 PSI
Bullet piercing tap valve:
Material: metal
Color: silver
Package includes:
1 x R134A refrigerant charging hose
2 x BPV31 bullet piercing tap valve kit
Warm notice:
It is not suitable for refrigerant 410a.
Put on your safety glasses and protective gloves before piercing the pipe.
This is not original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility, not work as brands.
7. BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port
Feature
- BPV31 Piercing Valve for Bullet with R134a refrigerant recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit).
- R134a refrigerant charge hose with gauge: 19″ hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4″ end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port.
- BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet
- 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4″, 5/16″ and 3/8″. The valve is not created or sold by Bullet.
- The hose is made of corrosion-resistant brass, won’t wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. But valve of other sellers with no gasket, it will leaks and can not fix for a fridge, not freezing properly.Our replacement hose kit has been well-tested by the manufacturer.
- Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a.
8. Interdynamics Certified A/C Pro R-12 to R-134a Retrofit Valve 7/16" Low Side Port
9. Aupoko A/C R-134A Refrigerant Recharging Hose Kit – with 1/2’’ Acme Male 1/4" SAE Female Can Tap Valve, R134A Quick Couple, Low Pressure Gauge and 59” Recharge Hose – 1 Year Warranty
Feature
- 【WIDE COMPATIBILITY】 The air conditioning refrigerant charging hose kit with gauge fits for R134A refrigerant to vehicle or home air-conditioning.
- 【PREMIUM QUALITY】 The R-1234A A/C service hose kit is made of metal and high quality rubber material, with solid construction and stable performance.
- 【EASY INSTALLATION】 Push & Lock coupler with auto shut off. Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge.
- 【DIMENSION】Auto 1/2 ACME LH AC refrigerant can opener tap dispensing valve, 59’’ charging hose, 200 PSI pressure gauge, and R134A Low side adapter.
- 【1 – YEAR WARRANTY】The AC R134A charging hose kit has 12 months warranty, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time.
10. FAVORCOOL R134A Car Air Conditioning Refrigerant Charging Hose kit with Pressure Gauge,1/2 Acme, AC Recharge Measuring U-Hose Can Tap, Perfect for Automobile and Home A/C Freon Charge U-Hose
Feature
- 1/2 ACME Thread for American and Europe. Metal valve with 1/2″ fitting. The connector to the Freon gas tank is adjustable.
- This System Refrigerant Charging Pipe with built-in safety valve to prevent accidental venting of refrigerant.
- The hose adopted high quality rubber material, high pressure resistance and reliable.
- For use in adding R134A refrigerant to vehicle or home air-conditioning with highly working performance.
- Used to check low side pressure for accurate fill of your air conditioner
Description
This R134A refrigerant Charge Hose comes with Gauge for easily viewing during use. It features with strong construction with maximum endurance. and the 1/2 thread is specially designed for American and Europe. It will working in adding R134A refrigerant to vehicle with highly working performance.
Conclusion
By our suggestions above, we hope that you can found Refrigerator Recharge Kit R134 for you.Please don’t forget to share your experience by comment in this post. Thank you!