Finding your suitable readers for 12 volt refrigerator fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 12 volt refrigerator fan including detail information and customer reviews. Let’s find out which is your favorite one.
519 reviews analysed
1. Titan- 12V 120mm DC Double Rack Mount Ventilation Cooling Fan for Fridge Vent and Ventilation Grille with Speed Controller (120mm) TTC-SC22(B)
Feature
- DESIGN FOR VENT & GRILLE MOUNTING VENTILATION- Great for refrigerator vent & grille ventilation in your motorhome, camper van, camper truck, caravan or any cabinets.
- FLEXIBLE AND SMART SPEED CONTROL MODE- Auto Temperature Control/ 6-levels manual controller to adjust for particular needs
- ALL WEATHER ACCEPTABLE- IP 55 Waterproof &dustproof fan, perfect for outdoor use
- SILENT OPERATION- Take TITAN professional 9-blades kukri silent fan, this multi-purpose fan or fridge vent fan provides you the quietest operation experience without being disturbed.
- EASY INSTALLATION- Rack hook design for easy install on refrigerator vent
Description
-WARNING: Do not attempt to revise polarity to change the airflow direction. It would not revise the airflow direction. The airflow would blow out from the cross grille side of the fan. If you revise the polarity (positive to negative), the fan and controller would not work. Please connect the cable to the same polarity (positive to positive/ negative to negative)
The refrigerator should be installed on or close to the cooling fins of the refrigerator.
You should install the double fan in any case so that the extracted hot air can somehow escape outside, preferably through ventilation slots in the caravan. You can install the double fan in both the lower and upper ventilation shafts. However, we recommend the installation in the upper ventilation slots, because if your refrigerator is operated with gas, the burner is usually located near the lower ventilation slots and then the gas supply might be hindered by the double ventilator.
2. Valterra A10-2618VP FridgeCool Exhaust Fan – 12 Volt
Description
Valterra’ FridgeCool Exhaust Fan keeps refrigerator coils cool and working efficiently with a wind tunnel design. It is fully automatic with no need for switches, activating when the fridge is on and the temperature is hot. The fan installs at the top of the roof vent or under the fridge coils for best cooling. 12.5 CFM / 49.8 MA. 2-3/4″ x 3-1/2″.
3. TITAN- 12V DC IP55 Waterproof/Dustproof Case Cooling Fan (120mm (2 Pack))
Feature
- Waterproof and dust-proof fan suits humid and high dust environments
- Long life-time two ball bearing is suitable for high-temperature operating
- 120mm x 120mm x 25mm (2-Pack)/ Rated Speed: 2200 RPM
- FREE REPLACEMENT GUARANTEE: The best customer service! We guarantee free to offer a replacement of new fan regarding the shipping problem or any uncontrolled product defaults and situations. Please feel free to contact us. Do not hesitate to order and give it a try now.
- Notice: The fan itself is waterproof, but the connection is not. Please notice the protection of the connector.
4. GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan
Feature
- Dimension of outer the frame is 120mm(L) x 120mm(W) x 25mm(H) / The size of fan in inch is 4.72in(L) x 4.72in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 105±0.3mm/4.13in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.) The started Voltage is 3.6V.
- Rated Voltage: DC 12V
- Rated Current: 0.3Amp ±10%
- Rated Speed: 2500 RPM
- Air flow: 83.2CFM
- Noise: 35.7dBA
- Power: 3.5Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: working up to 50000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
5. Coolerguys 120mm (120X120X38) High Airflow Waterproof IP67 12v Fan
Feature
- ENVIRONMENTAL RESISTANCE: IP67 design technology allows this to be completely dustproof and waterproof (rated to be submerged up to 1m for 30min).
- HIGHER AIRFLOW/LOWER NOISE: Updated blade and motor designs allow this to put out 157 cubic feet per minute with a noise level of 45db. That’s equivalent to the ambient noise of nighttime in the suburbs or a standard kitchen fridge.
- LONG LASTING: Dual ball bearings give a long projected lifespan of up to 67,000 hrs–that’s over 7 years. Backed by manufacturer with a 3 year warranty.
- STANDARD CONNECTOR: Standard 3 pin native connector allows for easy adaptability with many systems. Contact us if you need to determine which is the positive, negative, or tachometer (speed sensor) wires as they’re all painted black.
Description
Coolerguys 120mm (120x120x38) High Speed IP67 Fan
PRODUCT SPECIFICATIONS:
Fan Size: 120x120x38mm
RPM: 3500 +/- 10%
Rated Current: 0.75 Amp
Airflow: 157 CFM
Noise: 45 dB
Rated Voltage: 12 V DC
Bearing Type: Ball Bearing
Coolerguys is proud to launch our IP67 dust and waterproof fan series. These IP67 fans can be submerged up a meter underwater for up to 30 minutes. These are perfect for systems exposed to the elements such as solar enclosures, yachts, pest control, and exterior AV systems.
CERTIFICATIONS:
CE Listed
RoHS Compliant
6. TITAN- 12V DC IP55 Waterproof Double Rack Mount Ventilation Cooling Fan with Timer and Speed Controller- TTC-SC20 (140mm)
Feature
- DESIGN FOR VENT & GRILLE MOUNTING VENTILATION- Great for refrigerator vent & grille ventilation in your motorhome, camper van, camper truck, caravan or any cabinets.
- FLEXIBLE AND SMART SPEED CONTROL MODE- Auto Temperature Control/ 6-levels manual controller to adjust for particular needs
- ALL WEATHER ACCEPTABLE- IP 55 Waterproof &dustproof fan, perfect for outdoor use
- EASY INSTALLATION- Rack hook design for easy install on refrigerator vent
- FREE REPLACEMENT GUARANTEE: The best customer service! We guarantee free to offer a replacement of new fan regarding the shipping problem or any uncontrolled product defaults and situations. Please feel free to contact us. Do not hesitate to order and give it a try now.
7. Coolerguys 120MM (120X120X25) High Airflow Waterproof IP67 12v Fan
Feature
- ENVIRONMENTAL RESISTANCE: IP67 design technology allows this to be completely dustproof and waterproof (rated to be submerged up to 1m for 30min).
- HIGHER AIRFLOW/LOWER NOISE: Updated blade and motor designs allow this to put out 105 cubic feet per minute with a noise level of 42db. That’s equivalent to the ambient noise of nighttime in the suburbs or a standard kitchen fridge. Padded corners help dampen any vibration noise when mounting.
- LONG LASTING: Dual ball bearings give a long projected lifespan of up to 67,000 hrs–that’s over 7 years. Backed by manufacturer with a 3 year warranty.
- STANDARD CONNECTOR: Standard 3 pin native connector allows for easy adaptability with many systems. Contact us if you need to determine which is the positive, negative, or tachometer (speed sensor) wires as they’re all painted black.
8. Rodale E1503 Cooling Fan, DC, 12V, 120 mm x 120 mm x 38 mm
9. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
10. 2packs 40mm x 40mm x 10mm 4010 12V 0.15A Brushless DC Cooling Fan 2pin AB4010M12 UL TUV
Description
Description : Model: AB4010M12 NAME:DC12V BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC10.8-13.2
Consuming Current : 0.11A(0.15 Max.)
Consuming Power: 1.32W(1.8 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6200 PRM
Iife Expectance: 70,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 25db***
DC Line Length : 100mm
Max. Air Flow: 6.86CFM
Rotation Direction: Clounter-clockwise
Size:40x40x10mm
Size:18g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
Conclusion
By our suggestions above, we hope that you can found 12 Volt Refrigerator Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
